Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
A.K. Balaji 801-587-7772
152 KENN (1495 E. 100 S.)
Departmental Notes
Lab: 016 KENN (Ph: 801-581-7105)
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 1000 - 001 Intro Robot Sys Design I
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section.
ME EN 1000 - 001 Intro Robot Sys Design I
- Class Number: 1322
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 30
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section.
ME EN 1000 - 002 Intro Robot Sys Design I
ME EN 1000 - 002 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -6
ME EN 1000 - 003 Intro Robot Sys Design I
ME EN 1000 - 003 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -2
ME EN 1000 - 004 Intro Robot Sys Design I
ME EN 1000 - 004 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -6
ME EN 1000 - 005 Intro Robot Sys Design I
ME EN 1000 - 005 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -2
ME EN 1000 - 006 Intro Robot Sys Design I
ME EN 1000 - 006 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -3
ME EN 1000 - 007 Intro Robot Sys Design I
ME EN 1000 - 007 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -2
ME EN 1000 - 008 Intro Robot Sys Design I
ME EN 1000 - 008 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -1
ME EN 1000 - 009 Intro Robot Sys Design I
ME EN 1000 - 009 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 010 Intro Robot Sys Design I
If you are UNABLE to attend ANY of the ME EN 1000 lab sections that are currently open for enrollment, please enroll into this section. You will be moved to one of the other sections during the first week of class.
ME EN 1000 - 010 Intro Robot Sys Design I
- Class Number:
- Instructor: BAMBERG, STACY M
- Instructor: MASCARO, DEBRA J
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 2
If you are UNABLE to attend ANY of the ME EN 1000 lab sections that are currently open for enrollment, please enroll into this section. You will be moved to one of the other sections during the first week of class.
ME EN 1005 - 001 CAD Lab
ME EN 1005 - 001 CAD Lab
- Class Number: 7044
- Instructor: JOHNSON, AVERY
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15
ME EN 1300 - 001 Statics/Strength
ME EN 1300 - 001 Statics/Strength
- Class Number: 1323
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 53
ME EN 2020 - 001 Particle Dynamics
This class meets with ME EN 2080-001 in WEB 1230.
ME EN 2020 - 001 Particle Dynamics
- Class Number: 2785
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 22
This class meets with ME EN 2080-001 in WEB 1230.
ME EN 2080 - 001 Dynamics
ME EN 2080 - 001 Dynamics
- Class Number: 1325
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 49
ME EN 2500 - 001 Intro Energy Sys Des I
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.
ME EN 2500 - 001 Intro Energy Sys Des I
- Class Number: 14358
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 32
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.
ME EN 2500 - 002 Intro Energy Sys Des I
ME EN 2500 - 002 Intro Energy Sys Des I
- Class Number:
- Instructor: PARDYJAK, ERIC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 5
ME EN 2500 - 003 Intro Energy Sys Des I
ME EN 2500 - 003 Intro Energy Sys Des I
- Class Number:
- Instructor: PARDYJAK, ERIC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 0
ME EN 2500 - 004 Intro Energy Sys Des I
ME EN 2500 - 004 Intro Energy Sys Des I
- Class Number:
- Instructor: PARDYJAK, ERIC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 6
ME EN 2500 - 005 Intro Energy Sys Des I
ME EN 2500 - 005 Intro Energy Sys Des I
- Class Number:
- Instructor: PARDYJAK, ERIC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 0
ME EN 2500 - 006 Intro Energy Sys Des I
ME EN 2500 - 006 Intro Energy Sys Des I
- Class Number:
- Instructor: PARDYJAK, ERIC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 3
ME EN 2655 - 002 Manufacturing Lab
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 002 Manufacturing Lab
- Class Number: 10754
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 003 Manufacturing Lab
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 003 Manufacturing Lab
- Class Number: 12698
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 4
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 004 Manufacturing Lab
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 004 Manufacturing Lab
- Class Number: 12699
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 2
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 006 Manufacturing Lab
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 006 Manufacturing Lab
- Class Number: 10755
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 4
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 007 Manufacturing Lab
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2655 - 007 Manufacturing Lab
- Class Number: 12207
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 2
This lab requires a permission code. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the section number dropdown box, select this section as your first choice. In the additional relevant information field, please provide (1) alternate section numbers, (2) your year in the ME program, and (3) your major if not ME.
ME EN 2660 - 001 Machining Laboratory
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2660 - 001 Machining Laboratory
- Class Number: 17629
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Wait List: No
- Fees: $50.00
- Seats Available: 2
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2660 - 002 Machining Laboratory
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2660 - 002 Machining Laboratory
- Class Number: 17630
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Wait List: No
- Fees: $50.00
- Seats Available: 4
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2660 - 003 Machining Laboratory
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2660 - 003 Machining Laboratory
- Class Number: 17631
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Wait List: No
- Fees: $50.00
- Seats Available: 0
This lab requires a permission code. To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah. Please request a code at http://mech.utah.edu/forms/prereq/prereg.php. In the "Section Number" dropdown box, select this section as your first choice. In the "Additional Relevant Information" field, please provide alternate section numbers that would work for you.
ME EN 2960 - 001 Found. Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 2960 - 001 Found. Microsystems
- Class Number: 17658
- Instructor: HOGAN, ALEXANDER
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: 1
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 3200 - 001 Mechatronics I
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.
ME EN 3200 - 001 Mechatronics I
- Class Number: 1326
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 8
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.
ME EN 3200 - 002 Mechatronics I
ME EN 3200 - 002 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -2
ME EN 3200 - 003 Mechatronics I
ME EN 3200 - 003 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 3
ME EN 3200 - 004 Mechatronics I
ME EN 3200 - 004 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3200 - 005 Mechatronics I
ME EN 3200 - 005 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 006 Mechatronics I
ME EN 3200 - 006 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 2
ME EN 3200 - 007 Mechatronics I
ME EN 3200 - 007 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 008 Mechatronics I
ME EN 3200 - 008 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 3
ME EN 3200 - 009 Mechatronics I
ME EN 3200 - 009 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 010 Mechatronics I
ME EN 3200 - 010 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 011 Mechatronics I
ME EN 3200 - 011 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 6
ME EN 3200 - 012 Mechatronics I
ME EN 3200 - 012 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 013 Mechatronics I
ME EN 3200 - 013 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 2
ME EN 3300 - 001 Strength Of Materials
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section.
ME EN 3300 - 001 Strength Of Materials
- Class Number: 1331
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 18
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section.
ME EN 3300 - 002 Strength Of Materials
ME EN 3300 - 002 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 7
ME EN 3300 - 003 Strength Of Materials
ME EN 3300 - 003 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 1
ME EN 3300 - 004 Strength Of Materials
ME EN 3300 - 004 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 2
ME EN 3300 - 005 Strength Of Materials
ME EN 3300 - 005 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 006 Strength Of Materials
ME EN 3300 - 006 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3600 - 001 Thermodynamics II
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.
ME EN 3600 - 001 Thermodynamics II
- Class Number: 1329
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 31
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.
ME EN 3600 - 003 Thermodynamics II
ME EN 3600 - 003 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 004 Thermodynamics II
ME EN 3600 - 004 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3600 - 005 Thermodynamics II
ME EN 3600 - 005 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 5
ME EN 3600 - 006 Thermodynamics II
ME EN 3600 - 006 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 007 Thermodynamics II
ME EN 3600 - 007 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3600 - 008 Thermodynamics II
ME EN 3600 - 008 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 3
ME EN 3600 - 009 Thermodynamics II
ME EN 3600 - 009 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3600 - 010 Thermodynamics II
ME EN 3600 - 010 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 3
ME EN 3600 - 011 Thermodynamics II
ME EN 3600 - 011 Thermodynamics II
- Class Number:
- Instructor: CHEN, KUAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3700 - 001 Fluid Mechanics
This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section.
ME EN 3700 - 001 Fluid Mechanics
- Class Number: 1330
- Instructor: STOLL, Rob
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 24
This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section.
ME EN 3700 - 002 Fluid Mechanics
ME EN 3700 - 002 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -5
ME EN 3700 - 003 Fluid Mechanics
ME EN 3700 - 003 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 004 Fluid Mechanics
ME EN 3700 - 004 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 005 Fluid Mechanics
ME EN 3700 - 005 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 006 Fluid Mechanics
ME EN 3700 - 006 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -3
ME EN 3700 - 007 Fluid Mechanics
ME EN 3700 - 007 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 008 Fluid Mechanics
ME EN 3700 - 008 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 009 Fluid Mechanics
ME EN 3700 - 009 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 1
ME EN 3700 - 010 Fluid Mechanics
ME EN 3700 - 010 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 011 Fluid Mechanics
ME EN 3700 - 011 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 7
ME EN 3700 - 012 Fluid Mechanics
ME EN 3700 - 012 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 013 Fluid Mechanics
ME EN 3700 - 013 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 014 Fluid Mechanics
ME EN 3700 - 014 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 2
ME EN 3700 - 015 Fluid Mechanics
ME EN 3700 - 015 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 2
ME EN 3700 - 016 Fluid Mechanics
ME EN 3700 - 016 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 017 Fluid Mechanics
ME EN 3700 - 017 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 018 Fluid Mechanics
ME EN 3700 - 018 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 5
ME EN 3700 - 019 Fluid Mechanics
ME EN 3700 - 019 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 7
ME EN 3700 - 020 Fluid Mechanics
ME EN 3700 - 020 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 021 Fluid Mechanics
ME EN 3700 - 021 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 022 Fluid Mechanics
ME EN 3700 - 022 Fluid Mechanics
- Class Number:
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 5
ME EN 3900 - 001 Professionalism Seminar
ME EN 3900 - 001 Professionalism Seminar
- Class Number: 1332
- Instructor: MASCARO, DEBRA J
- Component: Seminar
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Seats Available: 23
ME EN 4000 - 001 Engineering Design I
ME EN 4000 - 001 Engineering Design I
- Class Number: 1333
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 18
ME EN 4060 - 001 Manufacturing
ME EN 4060 - 001 Manufacturing
- Class Number: 16635
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 50
ME EN 4999 - 001 Honors Thesis/Project
ME EN 4999 - 001 Honors Thesis/Project
- Class Number: 2176
- Instructor: CHEN, KUAN
- Component: Honors Thesis Project
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 5000 - 001 Engineering Law
Non-ME students are welcome to take this class. Please request a permission code at http://mech.utah.edu/forms/prereq/prereg.php
ME EN 5000 - 001 Engineering Law
- Class Number: 16103
- Instructor: CLAYTON, GRANT
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 22
Non-ME students are welcome to take this class. Please request a permission code at http://mech.utah.edu/forms/prereq/prereg.php
ME EN 5100 - 001 Ergonomics
ME EN 5100 - 001 Ergonomics
- Class Number: 8165
- Instructor: BLOSWICK, DONALD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
ME EN 5120 - 001 Human Factors in Eng
ME EN 5120 - 001 Human Factors in Eng
- Class Number: 16107
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 20
ME EN 5200 - 001 Classical Contro Sys
ME EN 5200 - 001 Classical Contro Sys
- Class Number: 1337
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 7
ME EN 5220 - 001 Robotics
ME EN 5220 - 001 Robotics
- Class Number: 3042
- Instructor: VAN DEN BERG, JUR
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 5300 - 001 Adv Strength
ME EN 5300 - 001 Adv Strength
- Class Number: 1334
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 27
ME EN 5500 - 001 Elasticity
ME EN 5500 - 001 Elasticity
- Class Number: 16111
- Instructor: LEELAVANICHKUL, SEUBPONG
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
ME EN 5510 - 001 Finite Elements
ME EN 5510 - 001 Finite Elements
- Class Number: 1335
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 23
ME EN 5700 - 001 Int Fluid Dynamics
ME EN 5700 - 001 Int Fluid Dynamics
- Class Number: 9850
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 5800 - 001 Sustainable Energy
ME EN 5800 - 001 Sustainable Energy
- Class Number: 10668
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 32
ME EN 5910 - 079 Co-Op
Enrollment in this course requires the approval of Dr. Mascaro. (dmascaro@mech.utah.edu)
ME EN 5910 - 079 Co-Op
- Class Number: 1955
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
Enrollment in this course requires the approval of Dr. Mascaro. (dmascaro@mech.utah.edu)
ME EN 5920 - 001 Design Project
Each faculty member if assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5920 - 001 Design Project
- Class Number: 2181
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member if assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
Each faculty member if assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
- Class Number: 5902
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
Each faculty member if assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
Each faculty member if assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
- Class Number: 4136
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 25
Each faculty member if assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEN 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5960 - 001 Microfluidic Chip Design & Fab
The course emphasizes modeling, design and fabrication principles for microfluidic chips. The course explores the unique challenges in designing basic microfluidics components such as channels, mixers, valves, and pumps. The course has a lab that is split between simulations and fabrication of microfluidic chips. The end goal of the course if for students to be able to design and fabricate basic microfluidic chips by the end of the course. The course includes a weekly 3 hour lab for hands on modeling and fabrication instruction, and for comparing theory with physical devices.
ME EN 5960 - 001 Microfluidic Chip Design & Fab
- Class Number: 12701
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
The course emphasizes modeling, design and fabrication principles for microfluidic chips. The course explores the unique challenges in designing basic microfluidics components such as channels, mixers, valves, and pumps. The course has a lab that is split between simulations and fabrication of microfluidic chips. The end goal of the course if for students to be able to design and fabricate basic microfluidic chips by the end of the course. The course includes a weekly 3 hour lab for hands on modeling and fabrication instruction, and for comparing theory with physical devices.
ME EN 5960 - 002 Nanoscale Heat Transfer
ME EN 5960 - 002 Nanoscale Heat Transfer
- Class Number: 16104
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 9
ME EN 5960 - 004 Advanced Manufacturing
This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 004 Advanced Manufacturing
- Class Number: 12042
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 2
This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
- Class Number: 12340
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 2
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 006 System Dynamics
ME EN 5960 - 006 System Dynamics
- Class Number: 12703
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 5960 - 016 Nano-Tribology & Contact Mech
ME EN 5960 - 016 Nano-Tribology & Contact Mech
- Class Number: 16944
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
- Class Number: 17321
- Instructor: JOHNSON, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 2
ME EN 6100 - 002 Ergonomics
ME EN 6100 - 002 Ergonomics
- Class Number: 8166
- Instructor: BLOSWICK, DONALD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 14
ME EN 6120 - 001 Human Factors in Eng
ME EN 6120 - 001 Human Factors in Eng
- Class Number: 16108
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15
ME EN 6200 - 001 Classical Control Sys
ME EN 6200 - 001 Classical Control Sys
- Class Number: 2182
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 1
ME EN 6220 - 001 Robotics
ME EN 6220 - 001 Robotics
- Class Number: 3041
- Instructor: VAN DEN BERG, JUR
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 17
ME EN 6225 - 001 Motion Planning
ME EN 6225 - 001 Motion Planning
- Class Number: 14359
- Instructor: JOHNSON, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: No
- Seats Available: 14
ME EN 6300 - 001 Adv. Strength
ME EN 6300 - 001 Adv. Strength
- Class Number: 2183
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 20
ME EN 6500 - 001 Elasticity
ME EN 6500 - 001 Elasticity
- Class Number: 16112
- Instructor: LEELAVANICHKUL, SEUBPONG
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 16
ME EN 6510 - 001 Finite Elements
ME EN 6510 - 001 Finite Elements
- Class Number: 2184
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 12
ME EN 6700 - 001 Int Fluid Dynamics
ME EN 6700 - 001 Int Fluid Dynamics
- Class Number: 9851
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 10
ME EN 6800 - 001 Sustainable Energy
ME EN 6800 - 001 Sustainable Energy
- Class Number: 10669
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 13
ME EN 6950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 4137
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 75
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 5261
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6960 - 001 Microfluidic Chip Design & Fab
ME EN 6960 - 001 Microfluidic Chip Design & Fab
- Class Number: 12702
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 3
ME EN 6960 - 002 Nanoscale Heat Transfer
ME EN 6960 - 002 Nanoscale Heat Transfer
- Class Number: 16850
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15
ME EN 6960 - 004 Advanced Manufacturing
Please contact the instructor to be placed on the registration list. This class also meets with ME EN 5960-004 in MEB 1221.
ME EN 6960 - 004 Advanced Manufacturing
- Class Number: 13746
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
Please contact the instructor to be placed on the registration list. This class also meets with ME EN 5960-004 in MEB 1221.
ME EN 6960 - 005 Advanced Manufacturing
Please contact the instructor to be placed on the registration list. This class meets with ME EN 5960-005 in MEB 1221.
ME EN 6960 - 005 Advanced Manufacturing
- Class Number: 13747
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Please contact the instructor to be placed on the registration list. This class meets with ME EN 5960-005 in MEB 1221.
ME EN 6960 - 006 System Dynamics
ME EN 6960 - 006 System Dynamics
- Class Number: 12704
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 6960 - 007 Manufacturing Practices
ME EN 6960 - 007 Manufacturing Practices
- Class Number: 10074
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 6960 - 008 Fund of Systems Engineering
ME EN 6960 - 008 Fund of Systems Engineering
- Class Number: 13268
- Instructor: GOLDBERG, BENJAMIN E
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 6960 - 009 Systems Eng III - Capstone
ME EN 6960 - 009 Systems Eng III - Capstone
- Class Number: 11658
- Instructor: GOLDBERG, BENJAMIN E
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 6960 - 010 Special Topics
ME EN 6960 - 010 Special Topics
- Class Number: 14730
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 6960 - 011 Microsensors and Actuators I
ME EN 6960 - 011 Microsensors and Actuators I
- Class Number: 15473
- Instructor: TATHIREDDY, PRASHANT
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 6960 - 012 Microsensors Lab
ME EN 6960 - 012 Microsensors Lab
- Class Number: 15474
- Instructor: CHAPPANDA NANAIAH, KARUMBAIAH
- Instructor: TATHIREDDY, PRASHANT
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 6960 - 013 Microsensors Lab
ME EN 6960 - 013 Microsensors Lab
- Class Number: 15523
- Instructor: CHAPPANDA NANAIAH, KARUMBAIAH
- Instructor: TATHIREDDY, PRASHANT
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 6960 - 014 Microsensors Lab
ME EN 6960 - 014 Microsensors Lab
- Class Number: 15524
- Instructor: CHAPPANDA NANAIAH, KARUMBAIAH
- Instructor: TATHIREDDY, PRASHANT
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 6960 - 016 Nano-Tribology & Contact Mech
ME EN 6960 - 016 Nano-Tribology & Contact Mech
- Class Number: 16945
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
- Class Number: 17322
- Instructor: JOHNSON, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 2185
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 74
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 2186
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7060 - 001 Fatigue & Creep
ME EN 7060 - 001 Fatigue & Creep
- Class Number: 16110
- Instructor: HOEPPNER, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 19
ME EN 7230 - 001 Robot Mobil & Manip
ME EN 7230 - 001 Robot Mobil & Manip
- Class Number: 16109
- Instructor: MINOR, MARK ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 4
ME EN 7600 - 001 Adv Thermodynamics
ME EN 7600 - 001 Adv Thermodynamics
- Class Number: 16105
- Instructor: AMEEL, TIM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 3
ME EN 7650 - 001 Adv Conduction
ME EN 7650 - 001 Adv Conduction
- Class Number: 16106
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 14
ME EN 7960 - 001 Robotics Seminar
ME EN 7960 - 001 Robotics Seminar
- Class Number: 7909
- Instructor: JOHNSON, DAVID
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
- Class Number: 10991
- Instructor: DILLON, M
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15
- Class Number: 17439
- Instructor: BRANNON, REBECCA M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 7960 - 004 Microsensors and Actuators I
ME EN 7960 - 004 Microsensors and Actuators I
- Class Number: 15479
- Instructor: TATHIREDDY, PRASHANT
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 4156
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 4175
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
- Class Number: 2187
- Instructor: CHEN, KUAN
- Component: Continuing Registration
- Type: In Person
- Units: 0.0
- Requisites: Yes
- Wait List: No
- Seats Available: 74
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.