Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
A.K. Balaji 801-587-7772
152 KENN (1495 E. 100 S.)
Departmental Notes
Lab: 016 KENN (Ph: 801-581-7105)
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 265 - 001 Manufacturing Lab
Class will be held in the MEB Mfg. Laboratory. Students must email ME EN Advising Office for assistance with registration.
ME EN 265 - 001 Manufacturing Lab
- Class Number: 6032
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $323.00
- Seats Available: 2
Class will be held in the MEB Mfg. Laboratory. Students must email ME EN Advising Office for assistance with registration.
ME EN 551 - 001 Finite Elements
ME EN 551 - 001 Finite Elements
- Class Number: 7898
- Instructor: HOMEL, MICHAEL
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $363.00
- Seats Available: 5
ME EN 1300 - 001 Statics/Strength
ME EN 1300 - 001 Statics/Strength
- Class Number: 1053
- Instructor: VOGT, ANDREW
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 17
ME EN 2020 - 001 Particle Dynamics
This class meets with ME EN 2080-001 in WEB 1250.
ME EN 2020 - 001 Particle Dynamics
- Class Number: 8272
- Instructor: FLOYD, MARSHALL
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
This class meets with ME EN 2080-001 in WEB 1250.
ME EN 2080 - 001 Dynamics
ME EN 2080 - 001 Dynamics
- Class Number: 8271
- Instructor: FLOYD, MARSHALL
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 53
ME EN 2655 - 001 Manufacturing Lab
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 001 Manufacturing Lab
- Class Number: 3314
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 4
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 002 Manufacturing Lab
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 002 Manufacturing Lab
- Class Number: 6069
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 6
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 003 Manufacturing Lab
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 003 Manufacturing Lab
- Class Number: 6070
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 6
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 004 Manufacturing Lab
ME EN 2655 - 004 Manufacturing Lab
- Class Number: 6071
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 3
ME EN 2655 - 005 Manufacturing Lab
ME EN 2655 - 005 Manufacturing Lab
- Class Number: 6072
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 6
ME EN 2655 - 006 Manufacturing Lab
ME EN 2655 - 006 Manufacturing Lab
- Class Number: 6073
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 3
ME EN 2655 - 007 Manufacturing Lab
ME EN 2655 - 007 Manufacturing Lab
- Class Number: 6074
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 4
ME EN 2655 - 008 Manufacturing Lab
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 008 Manufacturing Lab
- Class Number: 6075
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 6
This section is not currently open for enrollment. Please contact m.mun@mech.utah.edu for information.
ME EN 2655 - 009 Manufacturing Lab
ME EN 2655 - 009 Manufacturing Lab
- Class Number: 6076
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 3
ME EN 2950 - 002 Indep Study
ME EN 2950 - 002 Indep Study
- Class Number: 9285
- Instructor: FLOYD, MARSHALL
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 3
ME EN 5510 - 001 Finite Elements
ME EN 5510 - 001 Finite Elements
- Class Number: 2116
- Instructor: HOMEL, MICHAEL
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 10
ME EN 5910 - 079 Co-Op
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu.)
ME EN 5910 - 079 Co-Op
- Class Number: 1150
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 19
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu.)
ME EN 5920 - 001 Design Project
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5920 - 001 Design Project
- Class Number: 2285
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5930 - 001 Undergrad Thesis
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5930 - 001 Undergrad Thesis
- Class Number: 2834
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5950 - 001 Indep Study
- Class Number: 2765
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5950 - 011 Indep Study
ME EN 5950 - 011 Indep Study
- Class Number: 9113
- Instructor: KNUTSON, MICHAEL P
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5950 - 027 Indep Study
ME EN 5950 - 027 Indep Study
- Class Number: 7830
- Instructor: MERRYWEATHER, ANDREW
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5960 - 001 Project Mgt in a Tech Environ
ME EN 5960 - 001 Project Mgt in a Tech Environ
- Class Number: 4724
- Instructor: BLINN, MICHAEL P
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 5960 - 002 Advanced Machining
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to arrange a time and to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 5960 - 002 Advanced Machining
- Class Number: 6105
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: -1
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to arrange a time and to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 5960 - 003 Advanced Machining
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to arrange a time and to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 5960 - 003 Advanced Machining
- Class Number: 6657
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 0
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to arrange a time and to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 6510 - 001 Finite Elements
ME EN 6510 - 001 Finite Elements
- Class Number: 2117
- Instructor: HOMEL, MICHAEL
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 18
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 1194
- Instructor: BLOSWICK, DONALD
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6960 - 001 Machine Shop
ME EN 6960 - 001 Machine Shop
- Class Number: 4709
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 6960 - 002 Project Mgt in a Tech Environ
ME EN 6960 - 002 Project Mgt in a Tech Environ
- Class Number: 4725
- Instructor: BLINN, MICHAEL P
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 6960 - 005 Advanced Machining
This class meets in MEB 1221. Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 6960 - 005 Advanced Machining
- Class Number: 6732
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 1
This class meets in MEB 1221. Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 6960 - 006 Advanced Machining
This class meets in MEB 1221. Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 6960 - 006 Advanced Machining
- Class Number: 6733
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 1
This class meets in MEB 1221. Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://www.sa.utah.edu/regist/handbook/drop.htm or contact the Registrar's Office at 581-8969.
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1196
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 6970. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 1197
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6970. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 1198
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.