Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
LLCFT 155 - 001 Fused Glass: Cellular Bowl
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class. It is recommended that students take at least one glass class with Sarinda prior to this class.
LLCFT 155 - 001 Fused Glass: Cellular Bowl
- Class Number: 18612
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $109.00
- Seats Available: 12
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class. It is recommended that students take at least one glass class with Sarinda prior to this class.
LLCFT 156 - 001 Weave a Tapestry Bracelet
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 156 - 001 Weave a Tapestry Bracelet
- Class Number: 18613
- Instructor: BAUGH, DEANNA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $265.00
- Seats Available: 8
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 158 - 001 Fused Glass Artist Design
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 158 - 001 Fused Glass Artist Design
- Class Number: 18607
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $219.00
- Seats Available: 8
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 159 - 001 Fused Glass Swizzle Sticks
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 159 - 001 Fused Glass Swizzle Sticks
- Class Number: 18609
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $99.00
- Seats Available: 8
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 175 - 001 Wood Turning
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed materials and space rental.
LLCFT 175 - 001 Wood Turning
- Class Number: 18531
- Instructor: TOLLSTRUP, RYAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $455.00
- Seats Available: 5
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed materials and space rental.
LLCFT 175 - 002 Wood Turning
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed materials and space rental.
LLCFT 175 - 002 Wood Turning
- Class Number: 18532
- Instructor: TOLLSTRUP, RYAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $455.00
- Seats Available: 4
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed materials and space rental.
LLCFT 176 - 001 Fused Glass: Pocket Hearts
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 176 - 001 Fused Glass: Pocket Hearts
- Class Number: 18533
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 11
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 181 - 001 Kintsugi-Style Jewelry
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please bring any broken, memorable, or mismatched jewelry parts, stones, or gems you'd like to include in your project. Reading glasses, a small container to carry your piece home, and a mask (if desired) are also recommended. Special fee is for Kintsugi materials.
LLCFT 181 - 001 Kintsugi-Style Jewelry
- Class Number: 18534
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $89.00
- Seats Available: 9
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please bring any broken, memorable, or mismatched jewelry parts, stones, or gems you'd like to include in your project. Reading glasses, a small container to carry your piece home, and a mask (if desired) are also recommended. Special fee is for Kintsugi materials.
LLCFT 183 - 001 Sewing By Hand
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring a piece of clothing that needs mending and matching thread to the first class, and a piece of clothing to alter and matching thread to the third class. Class fee is for some shared class materials.
LLCFT 183 - 001 Sewing By Hand
- Class Number: 18535
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 12
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring a piece of clothing that needs mending and matching thread to the first class, and a piece of clothing to alter and matching thread to the third class. Class fee is for some shared class materials.
LLCFT 184 - 001 Upcycle Your Clothes
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please bring one piece of clothing to upcycle. Special fee is for studio rental and all needed materials.
LLCFT 184 - 001 Upcycle Your Clothes
- Class Number: 18536
- Instructor: ROCKS, ALLYSON
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $114.00
- Seats Available: 11
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please bring one piece of clothing to upcycle. Special fee is for studio rental and all needed materials.
LLCFT 185 - 001 Pulp Painting
This class takes place at Andre Hoggan Studio (850 S 400 W, Unit 111). Special fee is for all needed supplies.
LLCFT 185 - 001 Pulp Painting
- Class Number: 18537
- Instructor: HOGGAN, ANDRE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $129.00
- Seats Available: 6
This class takes place at Andre Hoggan Studio (850 S 400 W, Unit 111). Special fee is for all needed supplies.
LLCFT 186 - 001 Stained Glass w/ Copper Foil
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. Special fee is for all needed materials. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is two weeks before class.
LLCFT 186 - 001 Stained Glass w/ Copper Foil
- Class Number: 18538
- Instructor: FOSTER, TARA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $440.00
- Seats Available: 0
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. Special fee is for all needed materials. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is two weeks before class.
LLCFT 186 - 002 Stained Glass w/ Copper Foil
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. Special fee is for all needed materials. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is two weeks before class.
LLCFT 186 - 002 Stained Glass w/ Copper Foil
- Class Number: 18539
- Instructor: FOSTER, TARA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $440.00
- Seats Available: 4
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. Special fee is for all needed materials. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is two weeks before class.
LLCFT 187 - 001 Weaving Make and Take
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 187 - 001 Weaving Make and Take
- Class Number: 18540
- Instructor: MARCHANT, CATHERINE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $115.00
- Seats Available: 10
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 188 - 001 Inkle Band Weaving
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 188 - 001 Inkle Band Weaving
- Class Number: 18541
- Instructor: MARCHANT, CATHERINE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $179.00
- Seats Available: 8
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 190 - 001 Twined Summer Coasters
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 190 - 001 Twined Summer Coasters
- Class Number: 18557
- Instructor: BAUGH, DEANNA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $184.00
- Seats Available: 8
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 191 - 001 Handwoven Summer Placemats
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 191 - 001 Handwoven Summer Placemats
- Class Number: 18542
- Instructor: BAUGH, DEANNA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $315.00
- Seats Available: 9
Class meets at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio, use of tools, and materials.
LLCFT 192 - 001 Tee to Tote
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring some old t-shirts, scissors, and measuring tape. Students provide some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 192 - 001 Tee to Tote
- Class Number: 18543
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $109.00
- Seats Available: 15
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring some old t-shirts, scissors, and measuring tape. Students provide some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 195 - 001 Watercolor Accordion Journal
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed supplies.
LLCFT 195 - 001 Watercolor Accordion Journal
- Class Number: 18544
- Instructor: Smith, Jan S
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $129.00
- Seats Available: 16
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed supplies.
LLCFT 196 - 001 Mixed Media Bookmaking
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed supplies.
LLCFT 196 - 001 Mixed Media Bookmaking
- Class Number: 18545
- Instructor: Smith, Jan S
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $84.00
- Seats Available: 15
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed supplies.
LLCFT 198 - 001 Beginning Woodworking III
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). **Prerequisite LLCFT 359 Beginning Woodworking** Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 198 - 001 Beginning Woodworking III
- Class Number: 18546
- Instructor: HARMAN, JONATHAN
- Component: Activity
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $425.00
- Seats Available: 4
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). **Prerequisite LLCFT 359 Beginning Woodworking** Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 203 - 001 Cloisonne Enameling
Class meets at Salt City Smithery (3450 S Main St, Unit 30W, South Salt Lake). Special fee is for studio rental and all needed materials.
LLCFT 203 - 001 Cloisonne Enameling
- Class Number: 18547
- Instructor: GOODELL, MARIANNE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $204.00
- Seats Available: 9
Class meets at Salt City Smithery (3450 S Main St, Unit 30W, South Salt Lake). Special fee is for studio rental and all needed materials.
LLCFT 208 - 001 Adventures in Metalsmithing
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 208 - 001 Adventures in Metalsmithing
- Class Number: 18548
- Instructor: KIENITZ, NIKOLAS
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $294.00
- Seats Available: 6
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 210 - 001 Fused Glass
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class. It is recommended that students take at least one glass class with Sarinda prior to this class.
LLCFT 210 - 001 Fused Glass
- Class Number: 18549
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $129.00
- Seats Available: 1
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class. It is recommended that students take at least one glass class with Sarinda prior to this class.
LLCFT 214 - 001 Quiltmaking: Finish Your Quilt
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials.
LLCFT 214 - 001 Quiltmaking: Finish Your Quilt
- Class Number: 18550
- Instructor: HARTY, TRACEY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $109.00
- Seats Available: 9
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials.
LLCFT 217 - 001 Sew Your Own Tote!
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students supply their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@utah.edu to inquire about the status of a class.
LLCFT 217 - 001 Sew Your Own Tote!
- Class Number: 18551
- Instructor: HARTY, TRACEY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $99.00
- Seats Available: 10
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students supply their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@utah.edu to inquire about the status of a class.
LLCFT 218 - 001 Ceramic Under Glazing
Class meets at Workshop SLC (153 2100 S, South Salt Lake). Please wear art clothes. Special fee is for studio rental and all needed materials.
LLCFT 218 - 001 Ceramic Under Glazing
LLCFT 220 - 001 Blacksmithing: Forged Forever
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 220 - 001 Blacksmithing: Forged Forever
- Class Number: 18553
- Instructor: DANIELSON, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $120.00
- Seats Available: 10
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 229 - 001 Metalsmithing I
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 229 - 001 Metalsmithing I
- Class Number: 18554
- Instructor: KIENITZ, NIKOLAS
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $329.00
- Seats Available: 2
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 229 - 002 Metalsmithing I
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 229 - 002 Metalsmithing I
- Class Number: 18555
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $329.00
- Seats Available: 10
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 234 - 001 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 001 Welding: An Introduction
- Class Number: 18558
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $619.00
- Seats Available: 0
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 002 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 002 Welding: An Introduction
- Class Number: 18559
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $619.00
- Seats Available: 1
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 003 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 003 Welding: An Introduction
- Class Number: 18560
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $619.00
- Seats Available: 9
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 004 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 004 Welding: An Introduction
- Class Number: 18561
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $619.00
- Seats Available: 8
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 267 - 001 Beginning Sewing I
No class 1/19. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Please wait to purchase fabric until after first class. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 267 - 001 Beginning Sewing I
- Class Number: 18562
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $299.00
- Seats Available: 1
No class 1/19. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Please wait to purchase fabric until after first class. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 267 - 002 Beginning Sewing I
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Please wait to purchase fabric until after first class. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 267 - 002 Beginning Sewing I
- Class Number: 18563
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $299.00
- Seats Available: 9
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Please wait to purchase fabric until after first class. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 274 - 001 Blacksmithing: An Introduction
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 274 - 001 Blacksmithing: An Introduction
- Class Number: 18564
- Instructor: DANIELSON, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $445.00
- Seats Available: 4
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 274 - 002 Blacksmithing: An Introduction
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 274 - 002 Blacksmithing: An Introduction
- Class Number: 18565
- Instructor: DANIELSON, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $445.00
- Seats Available: 6
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 295 - 001 Beginning Crochet
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students are responsible for some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom supplies.
LLCFT 295 - 001 Beginning Crochet
- Class Number: 18567
- Instructor: TIFFANY, BARON
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $165.00
- Seats Available: 10
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students are responsible for some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom supplies.
LLCFT 296 - 001 Blacksmithing: Intermediate
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 296 - 001 Blacksmithing: Intermediate
- Class Number: 18568
- Instructor: DANIELSON, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $414.00
- Seats Available: 8
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 323 - 001 Blacksmithing: Laminated Steel
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 323 - 001 Blacksmithing: Laminated Steel
- Class Number: 18569
- Instructor: DANIELSON, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $445.00
- Seats Available: 8
This class takes place in person at Wasatch Forge (3747 Parkway Boulevard, Unit 106 A, West Valley City). **Prerequisite: LLCFT274 Blacksmithing: An Introduction, or equivalent experience.** Wear closed-toe shoes and natural fiber clothing. Students must bring their own above-the-wrist leather work gloves and safety glasses (both can be found at home stores). Bring a large container of water or sports drink--this is hot and thirsty work! Special fee is for supplies and studio rental.
LLCFT 352 - 001 Handwoven Earrings
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all materials needed to create one pair of earrings.
LLCFT 352 - 001 Handwoven Earrings
- Class Number: 18571
- Instructor: WIDNER, CATHERINE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $134.00
- Seats Available: 8
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all materials needed to create one pair of earrings.
LLCFT 353 - 001 Metalsmithing II
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 353 - 001 Metalsmithing II
- Class Number: 18572
- Instructor: KIENITZ, NIKOLAS
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $329.00
- Seats Available: 7
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 353 - 002 Metalsmithing II
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 353 - 002 Metalsmithing II
- Class Number: 18573
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $329.00
- Seats Available: 10
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.** Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor.
LLCFT 359 - 001 Beginning Woodworking
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 359 - 001 Beginning Woodworking
- Class Number: 18574
- Instructor: MITCHELL, KASEY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $439.00
- Seats Available: 3
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 359 - 002 Beginning Woodworking
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 359 - 002 Beginning Woodworking
- Class Number: 18575
- Instructor: MITCHELL, KASEY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $439.00
- Seats Available: 2
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 362 - 001 Beginning Knitting
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wait until after the first class to purchase yarn; students provide their own yarn after the first class session. Special fee is for all other needed supplies including knitting needles. Students should expect to do 1-3 hours of knitting per week at home to keep up with coursework.
LLCFT 362 - 001 Beginning Knitting
- Class Number: 18578
- Instructor: ZIMMERMAN, CINDY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $235.00
- Seats Available: 5
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wait until after the first class to purchase yarn; students provide their own yarn after the first class session. Special fee is for all other needed supplies including knitting needles. Students should expect to do 1-3 hours of knitting per week at home to keep up with coursework.
LLCFT 371 - 001 Wheel-Thrown Ceramics: Bowls
Class meets at Workshop SLC (153 2100 S, South Salt Lake). Please wear art clothes. Special fee is for studio rental and all needed materials.
LLCFT 371 - 001 Wheel-Thrown Ceramics: Bowls
LLCFT 372 - 001 Hand Embroidery: From Stitches
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students are responsible for some of their own materials; find a list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipt. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for some shared materials.
LLCFT 372 - 001 Hand Embroidery: From Stitches
- Class Number: 18584
- Instructor: ROCKS, ALLYSON
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $124.00
- Seats Available: 12
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students are responsible for some of their own materials; find a list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipt. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for some shared materials.
LLCFT 374 - 001 Bookbinding
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students provide some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom materials.
LLCFT 374 - 001 Bookbinding
- Class Number: 18582
- Instructor: MURRAY, JANIECE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $145.00
- Seats Available: 12
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students provide some of their own materials; find the list online. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom materials.
LLCFT 379 - 001 Kintsugi: The Japanese Art
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Special fee is for all needed materials. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 001 Kintsugi: The Japanese Art
- Class Number: 18585
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $140.00
- Seats Available: 7
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Special fee is for all needed materials. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 002 Kintsugi: The Japanese Art
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Special fee is for all needed materials. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 002 Kintsugi: The Japanese Art
- Class Number: 18586
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $140.00
- Seats Available: 10
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Special fee is for all needed materials. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 381 - 001 Pysanky: Ukrainian Art Egg
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear an apron or art clothes. Special fee is for all required materials. Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is two weeks before class.
LLCFT 381 - 001 Pysanky: Ukrainian Art Egg
- Class Number: 18592
- Instructor: POULSON, RYNNA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $220.00
- Seats Available: 12
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear an apron or art clothes. Special fee is for all required materials. Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is two weeks before class.
LLCFT 383 - 001 Wheel-Thrown Ceramics
Class meets at Workshop SLC (153 2100 S, South Salt Lake). Please wear art clothes. Special fee is for studio rental and all needed materials.
LLCFT 383 - 001 Wheel-Thrown Ceramics
LLCFT 387 - 001 Beginning Sewing II: Basic
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.** Students provide their own sewing machine and most of their own supplies; find the list online. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 387 - 001 Beginning Sewing II: Basic
- Class Number: 18593
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $279.00
- Seats Available: 6
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.** Students provide their own sewing machine and most of their own supplies; find the list online. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 390 - 001 Jewelry Make and Take: Ring
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 390 - 001 Jewelry Make and Take: Ring
- Class Number: 18594
- Instructor: KIENITZ, NIKOLAS
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $159.00
- Seats Available: 7
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 395 - 001 Beginning Woodworking II
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). **Prerequisite LLCFT 359 Beginning Woodworking** Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 395 - 001 Beginning Woodworking II
- Class Number: 18597
- Instructor: HARMAN, JONATHAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $429.00
- Seats Available: 7
Class takes place at Community Woodshop SLC (585 W 3900 S #6, SLC). **Prerequisite LLCFT 359 Beginning Woodworking** Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable. Special fee is for all needed equipment and shop rental.
LLCFT 399 - 001 Enameling: An Introduction
Class meets at Salt City Smithery (3450 S Main St, Unit 28W, South Salt Lake). Special fee is for all needed supplies and space and tool rental.
LLCFT 399 - 001 Enameling: An Introduction
- Class Number: 19117
- Instructor: GOODELL, MARIANNE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $219.00
- Seats Available: 8
Class meets at Salt City Smithery (3450 S Main St, Unit 28W, South Salt Lake). Special fee is for all needed supplies and space and tool rental.
LLCFT 400 - 001 Fused Glass Stringer Plate
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 400 - 001 Fused Glass Stringer Plate
- Class Number: 18598
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 10
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 401 - 001 Fused Glass Organic Bowl
This class takes place at Reflective Art Studio (422 W 900 S #107). Please wear an apron or art clothes. Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 401 - 001 Fused Glass Organic Bowl
- Class Number: 18599
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 7
This class takes place at Reflective Art Studio (422 W 900 S #107). Please wear an apron or art clothes. Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 409 - 001 Jewelry Make and Take:Bolo Tie
Class meets at Salt Lake City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool/space rental and all required materials.
LLCFT 409 - 001 Jewelry Make and Take:Bolo Tie
- Class Number: 19128
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $184.00
- Seats Available: 8
Class meets at Salt Lake City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool/space rental and all required materials.
LLCFT 410 - 001 Keum-boo Earrings
Class meets at Salt Lake City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool/space rental and all required materials.
LLCFT 410 - 001 Keum-boo Earrings
- Class Number: 18603
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $194.00
- Seats Available: 7
Class meets at Salt Lake City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool/space rental and all required materials.
LLCFT 411 - 001 Beginning Sewing III
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). **LLCFT 267 Beginning Sewing I and LLCFT 387 Beginning Sewing II: Basic Garment Construction are recommended precursors to this class.** Students provide their own sewing machine and most of their own supplies; find the list online. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 411 - 001 Beginning Sewing III
- Class Number: 19127
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $255.00
- Seats Available: 6
Class takes place at MAKE Salt Lake (663 W 100 S, SLC). **LLCFT 267 Beginning Sewing I and LLCFT 387 Beginning Sewing II: Basic Garment Construction are recommended precursors to this class.** Students provide their own sewing machine and most of their own supplies; find the list online. Students can expect to carry their machines for about a 5 minute walk to the classroom. Students are welcome to bring snacks/drinks to class. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared supplies and studio rental. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.**
LLCFT 412 - 001 Weave a Rag Rug
This class takes place at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio rental, use of tools, and all required materials.
LLCFT 412 - 001 Weave a Rag Rug
- Class Number: 19126
- Instructor: MARCHANT, CATHERINE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $369.00
- Seats Available: 7
This class takes place at Salt Lake Weaving Studio, (2875 S. West Temple, South Salt Lake). Special fee is for studio rental, use of tools, and all required materials.
LLCFT 420 - 001 Textured Glass in a Box Frame
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 420 - 001 Textured Glass in a Box Frame
- Class Number: 19138
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $119.00
- Seats Available: 9
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Student work will be available for pick up a week after class.
LLCFT 421 - 001 Glass Jewelry
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Students may purchase extra materials in class if needed. Student work will be available for pick up a week after class.
LLCFT 421 - 001 Glass Jewelry
- Class Number: 18605
- Instructor: JONES, SARINDA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $109.00
- Seats Available: 11
This class takes place at Reflective Art Studio (422 W 900 S #107). Special fee is for all required materials and studio rental. Students may purchase extra materials in class if needed. Student work will be available for pick up a week after class.
LLCFT 425 - 001 Papermaking as an Artform
This class takes place at Andre Hoggan Studio (850 S 400 W, Unit 111). Special fee is for all needed supplies.
LLCFT 425 - 001 Papermaking as an Artform
- Class Number: 19123
- Instructor: HOGGAN, ANDRE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $129.00
- Seats Available: 4
This class takes place at Andre Hoggan Studio (850 S 400 W, Unit 111). Special fee is for all needed supplies.
LLCFT 426 - 001 Papermaking: Mulberry
This class takes place in person at Andre Hogan Studio (850 S 400 W, Unit 111). Special fee is for all required materials.
LLCFT 426 - 001 Papermaking: Mulberry
- Class Number: 19122
- Instructor: HOGGAN, ANDRE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $129.00
- Seats Available: 4
This class takes place in person at Andre Hogan Studio (850 S 400 W, Unit 111). Special fee is for all required materials.
LLCFT 434 - 001 Sashiko
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring their own note taking materials. Students can choose to bring comfort sewing items such as a threader, pincushion, rotary blade and cutting mat. Special fee is for the Sashiko kits. Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is three weeks before class.
LLCFT 434 - 001 Sashiko
- Class Number: 19121
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $99.00
- Seats Available: 3
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students should bring their own note taking materials. Students can choose to bring comfort sewing items such as a threader, pincushion, rotary blade and cutting mat. Special fee is for the Sashiko kits. Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is three weeks before class.
LLCFT 435 - 001 Wire Weaving for Jewelry
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). A variety of cabochons (flat-backed stones that are also known as "cabs") will be provided but students are welcome to bring their own. Cabs that are round or oval and roughly the size of a quarter work best for this course. Special fee is for tool rental and supplies.
LLCFT 435 - 001 Wire Weaving for Jewelry
- Class Number: 19120
- Instructor: KIENITZ, NIKOLAS
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $249.00
- Seats Available: 8
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). A variety of cabochons (flat-backed stones that are also known as "cabs") will be provided but students are welcome to bring their own. Cabs that are round or oval and roughly the size of a quarter work best for this course. Special fee is for tool rental and supplies.
LLCFT 436 - 001 Crafting Cassava Root Flower
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students supply the following materials: cutter pliers, cooling racks, a medium-size box to store their craft materials (ex. shoe box, shipping box). Special fee is for shared materials.
LLCFT 436 - 001 Crafting Cassava Root Flower
- Class Number: 19119
- Instructor: CABRERA CAMPOS, PAULA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $99.00
- Seats Available: 12
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students supply the following materials: cutter pliers, cooling racks, a medium-size box to store their craft materials (ex. shoe box, shipping box). Special fee is for shared materials.