Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEK 1560 - 801-587-8479
Graduate Studies Office
Mark Fehlberg
MEK 1568 - 801-585-9293
Departmental Notes
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system may not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 1000 - 001 Intro Desgn for Eng Sys
This course requires enrollment in a corresponding lab section. Lab sections 002-004 correspond to this lecture section. Students must either be direct admitted to the College of Engineering (incoming Freshmen) or apply and be admitted to the Mechanical Engineering Undergraduate Program (transfer and UofU students who enrolled prior to Fall semester) in order to enroll in this course.
ME EN 1000 - 001 Intro Desgn for Eng Sys
- Class Number:
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
This course requires enrollment in a corresponding lab section. Lab sections 002-004 correspond to this lecture section. Students must either be direct admitted to the College of Engineering (incoming Freshmen) or apply and be admitted to the Mechanical Engineering Undergraduate Program (transfer and UofU students who enrolled prior to Fall semester) in order to enroll in this course.
ME EN 1000 - 002 Intro Desgn for Eng Sys
ME EN 1000 - 002 Intro Desgn for Eng Sys
- Class Number: 12430
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
ME EN 1000 - 003 Intro Desgn for Eng Sys
ME EN 1000 - 003 Intro Desgn for Eng Sys
- Class Number: 4119
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 004 Intro Desgn for Eng Sys
ME EN 1000 - 004 Intro Desgn for Eng Sys
- Class Number: 10946
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 005 Intro Desgn for Eng Sys
This course requires enrollment in a corresponding lab section. Lab sections 006-008 correspond to this lecture section. Students don't need to be Mechanical Engineering majors to enroll in this course but need full major status to take any subsequent ME EN prefix course.
ME EN 1000 - 005 Intro Desgn for Eng Sys
- Class Number:
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: -1
This course requires enrollment in a corresponding lab section. Lab sections 006-008 correspond to this lecture section. Students don't need to be Mechanical Engineering majors to enroll in this course but need full major status to take any subsequent ME EN prefix course.
ME EN 1000 - 006 Intro Desgn for Eng Sys
ME EN 1000 - 006 Intro Desgn for Eng Sys
- Class Number: 1616
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: -1
ME EN 1000 - 007 Intro Desgn for Eng Sys
ME EN 1000 - 007 Intro Desgn for Eng Sys
- Class Number: 1619
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 008 Intro Desgn for Eng Sys
ME EN 1000 - 008 Intro Desgn for Eng Sys
- Class Number: 10947
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
ME EN 1000 - 009 Intro Desgn for Eng Sys
This course requires enrollment in a corresponding lab section. Lab sections 010-012 correspond to this lecture section. Students must either be direct admitted to the College of Engineering (incoming Freshmen) or apply and be admitted to the Mechanical Engineering Undergraduate Program (transfer and UofU students who enrolled prior to Fall semester) in order to enroll in this course.
ME EN 1000 - 009 Intro Desgn for Eng Sys
- Class Number:
- Instructor: NALEWAY, STEVEN E
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
This course requires enrollment in a corresponding lab section. Lab sections 010-012 correspond to this lecture section. Students must either be direct admitted to the College of Engineering (incoming Freshmen) or apply and be admitted to the Mechanical Engineering Undergraduate Program (transfer and UofU students who enrolled prior to Fall semester) in order to enroll in this course.
ME EN 1000 - 011 Intro Desgn for Eng Sys
ME EN 1000 - 011 Intro Desgn for Eng Sys
- Class Number: 8496
- Instructor: NALEWAY, STEVEN E
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: -1
ME EN 1000 - 012 Intro Desgn for Eng Sys
ME EN 1000 - 012 Intro Desgn for Eng Sys
- Class Number: 4118
- Instructor: NALEWAY, STEVEN E
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
ME EN 1000 - 013 Intro Desgn for Eng Sys
This course requires registration for a lab section 14 or 15. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 1000 - 013 Intro Desgn for Eng Sys
- Class Number:
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 9
This course requires registration for a lab section 14 or 15. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 1000 - 014 Intro Desgn for Eng Sys
ME EN 1000 - 014 Intro Desgn for Eng Sys
- Class Number: 19828
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 2
ME EN 1000 - 015 Intro Desgn for Eng Sys
ME EN 1000 - 015 Intro Desgn for Eng Sys
- Class Number: 19829
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 7
ME EN 1005 - 001 CAD Lab
This course is self-directed in Canvas. Students may attend a ME EN 1000 lab if they wish to receive instruction in person. Contact the ME EN 1000 instructors with any questions.
ME EN 1005 - 001 CAD Lab
- Class Number: 4733
- Instructor: DILLON, M
- Instructor: NALEWAY, STEVEN E
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 21
This course is self-directed in Canvas. Students may attend a ME EN 1000 lab if they wish to receive instruction in person. Contact the ME EN 1000 instructors with any questions.
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
Sections 2-4 belong to this section. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
- Class Number:
- Instructor: MASCARO, DEBRA J
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $80.00
- Seats Available: -9
Sections 2-4 belong to this section. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
- Class Number: 10658
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $80.00
- Seats Available: 1
ME EN 1010 - 003 Cmptr Prob Solv Eng Sys
ME EN 1010 - 003 Cmptr Prob Solv Eng Sys
- Class Number: 11269
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $80.00
- Seats Available: -3
ME EN 1010 - 004 Cmptr Prob Solv Eng Sys
ME EN 1010 - 004 Cmptr Prob Solv Eng Sys
- Class Number: 14814
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $80.00
- Seats Available: -1
ME EN 1010 - 005 Cmptr Prob Solv Eng Sys
ME EN 1010 - 005 Cmptr Prob Solv Eng Sys
- Class Number: 10152
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $80.00
- Seats Available: -4
ME EN 2010 - 001 Statics
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 2010 - 001 Statics
- Class Number:
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $42.35
- Seats Available: 4
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 2010 - 002 Statics
ME EN 2010 - 002 Statics
- Class Number: 13608
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 4
ME EN 2010 - 003 Statics
ME EN 2010 - 003 Statics
- Class Number: 13609
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
ME EN 2010 - 004 Statics
ME EN 2010 - 004 Statics
- Class Number: 13610
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 1
ME EN 2010 - 005 Statics
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 2010 - 005 Statics
- Class Number:
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $42.35
- Seats Available: 4
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 2010 - 006 Statics
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2010 - 006 Statics
- Class Number: 15359
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: Hybrid & IVC
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: -1
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2010 - 007 Statics
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2010 - 007 Statics
- Class Number: 15360
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: Hybrid & IVC
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2010 - 008 Statics
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2010 - 008 Statics
- Class Number: 15361
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: Hybrid & IVC
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: -3
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 2030 - 001 Dynamics
ME EN 2030 - 001 Dynamics
- Class Number: 1306
- Instructor: FEHLBERG, MARK
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 2300 - 001 Thermodynamics
This class will have synchronous discussions at posted times, along with recorded lectures.
ME EN 2300 - 001 Thermodynamics
- Class Number: 18242
- Instructor: AMEEL, TIM
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
This class will have synchronous discussions at posted times, along with recorded lectures.
ME EN 2450 - 001 Num Methods for Eng Sys
ME EN 2450 - 001 Num Methods for Eng Sys
- Class Number:
- Instructor: STOLL, Rob
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 20
ME EN 2450 - 003 Num Methods for Eng Sys
ME EN 2450 - 003 Num Methods for Eng Sys
- Class Number: 9915
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 2450 - 004 Num Methods for Eng Sys
ME EN 2450 - 004 Num Methods for Eng Sys
- Class Number: 9919
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
ME EN 2450 - 005 Num Methods for Eng Sys
ME EN 2450 - 005 Num Methods for Eng Sys
- Class Number: 9916
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 2450 - 006 Num Methods for Eng Sys
ME EN 2450 - 006 Num Methods for Eng Sys
- Class Number: 9917
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 2450 - 007 Num Methods for Eng Sys
ME EN 2450 - 007 Num Methods for Eng Sys
- Class Number: 9918
- Instructor: STOLL, Rob
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 2550 - 001 Prob & Stats for Eng
ME EN 2550 - 001 Prob & Stats for Eng
- Class Number: 12432
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 14
ME EN 2650 - 001 Manufact for Eng Sys
This course requires enrollment in a corresponding lab section. Section 006 is for students who have completed ME EN 2655 or equivalent Manufacturing Lab course.
ME EN 2650 - 001 Manufact for Eng Sys
- Class Number:
- Instructor: TAN, Wenda
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 14
This course requires enrollment in a corresponding lab section. Section 006 is for students who have completed ME EN 2655 or equivalent Manufacturing Lab course.
ME EN 2650 - 002 Manufact for Eng Sys
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 002 Manufact for Eng Sys
- Class Number: 10438
- Instructor: TAN, Wenda
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 003 Manufact for Eng Sys
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 003 Manufact for Eng Sys
- Class Number: 10439
- Instructor: TAN, Wenda
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 004 Manufact for Eng Sys
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 004 Manufact for Eng Sys
- Class Number: 10440
- Instructor: TAN, Wenda
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 10
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 005 Manufact for Eng Sys
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2650 - 005 Manufact for Eng Sys
- Class Number: 12877
- Instructor: TAN, Wenda
- Component: Laboratory
- Type: Interactive Video Conferencing
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 12
Students will attend an in-person machine shop tour and then watch demo labs online the rest of the semester. The tour will also be recorded for students wishing to complete the entire class remotely.
ME EN 2960 - 001 Foundations of Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 2960 - 001 Foundations of Microsystems
- Class Number: 8522
- Instructor: GOENNER, BRADY
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $85.00
- Seats Available: 2
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 2960 - 003 Success in Mechanical Engineer
This section is part of a Mechanical Engineering learning community. Please contact the instructor for more information.
ME EN 2960 - 003 Success in Mechanical Engineer
- Class Number: 15353
- Instructor: Sriphong-Ngarm, MORGAN
- Component: Lecture
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $15.00
- Seats Available: 0
This section is part of a Mechanical Engineering learning community. Please contact the instructor for more information.
ME EN 2960 - 004 Success in Mechanical Engineer
ME EN 2960 - 004 Success in Mechanical Engineer
- Class Number: 15354
- Instructor: PETRIE, BENJAMIN
- Component: Lecture
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $15.00
- Seats Available: 0
ME EN 2960 - 005 Acad Skills for Mech Engineer
ME EN 2960 - 005 Acad Skills for Mech Engineer
- Class Number: 17160
- Instructor: BARNARD, KATIE
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 0.5
- Wait List: Yes
- Seats Available: 6
ME EN 3000 - 001 Design of Mech Elements
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 3000 - 001 Design of Mech Elements
- Class Number: 9932
- Instructor: CHANG, JIYOUNG
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $5.00
- Seats Available: 7
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 3220 - 001 Dynamic Sys & Control
ME EN 3220 - 001 Dynamic Sys & Control
- Class Number: 12441
- Instructor: KIM, JAY
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 3230 - 001 Mechatronics
Sections 2-5 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 3230 - 001 Mechatronics
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 8
Sections 2-5 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 3230 - 002 Mechatronics
ME EN 3230 - 002 Mechatronics
- Class Number: 12436
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -3
ME EN 3230 - 003 Mechatronics
ME EN 3230 - 003 Mechatronics
- Class Number: 12437
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -1
ME EN 3230 - 004 Mechatronics
ME EN 3230 - 004 Mechatronics
- Class Number: 12438
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 0
ME EN 3230 - 005 Mechatronics
ME EN 3230 - 005 Mechatronics
- Class Number: 12439
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 5
ME EN 3230 - 006 Mechatronics
ME EN 3230 - 006 Mechatronics
- Class Number: 18890
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -1
ME EN 3230 - 007 Mechatronics
ME EN 3230 - 007 Mechatronics
- Class Number: 19599
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 0
ME EN 3310 - 001 Mechanics of Materials
ME EN 3310 - 001 Mechanics of Materials
- Class Number: 15707
- Instructor: NEWELL, PANIA
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 3315 - 001 Mech of Materials Lab
ME EN 3315 - 001 Mech of Materials Lab
- Class Number: 15697
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 002 Mech of Materials Lab
ME EN 3315 - 002 Mech of Materials Lab
- Class Number: 15696
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 1
ME EN 3315 - 003 Mech of Materials Lab
ME EN 3315 - 003 Mech of Materials Lab
- Class Number: 15698
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 004 Mech of Materials Lab
ME EN 3315 - 004 Mech of Materials Lab
- Class Number: 15699
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 005 Mech of Materials Lab
ME EN 3315 - 005 Mech of Materials Lab
- Class Number: 16743
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 006 Mech of Materials Lab
ME EN 3315 - 006 Mech of Materials Lab
- Class Number: 15700
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 007 Mech of Materials Lab
ME EN 3315 - 007 Mech of Materials Lab
- Class Number: 15701
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 008 Mech of Materials Lab
ME EN 3315 - 008 Mech of Materials Lab
- Class Number: 15702
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 009 Mech of Materials Lab
ME EN 3315 - 009 Mech of Materials Lab
- Class Number: 15703
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 010 Mech of Materials Lab
ME EN 3315 - 010 Mech of Materials Lab
- Class Number: 15704
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 011 Mech of Materials Lab
ME EN 3315 - 011 Mech of Materials Lab
- Class Number: 19447
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 012 Mech of Materials Lab
ME EN 3315 - 012 Mech of Materials Lab
- Class Number: 19448
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3315 - 014 Mech of Materials Lab
ME EN 3315 - 014 Mech of Materials Lab
- Class Number: 20029
- Instructor: NEWELL, PANIA
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3400 - 001 Prof Comm for MEs
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 001 Prof Comm for MEs
- Class Number: 11463
- Instructor: ASKREN, RUSS
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 002 Prof Comm for MEs
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 002 Prof Comm for MEs
- Class Number: 14660
- Instructor: BOOTH, AUSTIN
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 003 Prof Comm for MEs
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 003 Prof Comm for MEs
- Class Number: 15663
- Instructor: BOOTH, AUSTIN
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 1
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 004 Prof Comm for MEs
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3400 - 004 Prof Comm for MEs
- Class Number: 13123
- Instructor: ASKREN, RUSS
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 3650 - 001 Heat Transfer
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 3650 - 001 Heat Transfer
- Class Number: 18336
- Instructor: RAO, SAMEER R
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $77.65
- Seats Available: 19
The course fee covers all required textbooks and course materials at a reduced cost. Students may request to opt out here: https://portal.verba.io/utah/login
ME EN 3710 - 001 Fluid Mechanics
ME EN 3710 - 001 Fluid Mechanics
- Class Number: 13737
- Instructor: CALAF, MARC
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 11
ME EN 4000 - 001 Engineering Design I
ME EN 4000 - 001 Engineering Design I
- Class Number: 1309
- Instructor: WARREN, ROSEANNE
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 6
ME EN 4010 - 001 Engineering Design II
ME EN 4010 - 001 Engineering Design II
- Class Number: 10431
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 9
ME EN 4650 - 001 TFES Lab
ME EN 4650 - 001 TFES Lab
- Class Number:
- Instructor: DILLON, M
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 15
ME EN 4650 - 002 TFES Lab
ME EN 4650 - 002 TFES Lab
- Class Number: 13775
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 003 TFES Lab
ME EN 4650 - 003 TFES Lab
- Class Number: 13776
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 1
ME EN 4650 - 004 TFES Lab
ME EN 4650 - 004 TFES Lab
- Class Number: 13777
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 005 TFES Lab
ME EN 4650 - 005 TFES Lab
- Class Number: 13778
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 006 TFES Lab
ME EN 4650 - 006 TFES Lab
- Class Number: 13779
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 007 TFES Lab
ME EN 4650 - 007 TFES Lab
- Class Number: 17942
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 008 TFES Lab
ME EN 4650 - 008 TFES Lab
- Class Number: 13780
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4650 - 009 TFES Lab
ME EN 4650 - 009 TFES Lab
- Class Number: 13781
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 010 TFES Lab
ME EN 4650 - 010 TFES Lab
- Class Number: 13782
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 011 TFES Lab
ME EN 4650 - 011 TFES Lab
- Class Number: 13784
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 012 TFES Lab
ME EN 4650 - 012 TFES Lab
- Class Number: 13785
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 013 TFES Lab
ME EN 4650 - 013 TFES Lab
- Class Number: 13786
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 1
ME EN 4650 - 014 TFES Lab
ME EN 4650 - 014 TFES Lab
- Class Number: 13787
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 015 TFES Lab
ME EN 4650 - 015 TFES Lab
- Class Number: 13788
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 016 TFES Lab
ME EN 4650 - 016 TFES Lab
- Class Number: 13789
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 017 TFES Lab
ME EN 4650 - 017 TFES Lab
- Class Number: 17941
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 2
ME EN 4650 - 018 TFES Lab
ME EN 4650 - 018 TFES Lab
- Class Number: 13790
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4650 - 019 TFES Lab
ME EN 4650 - 019 TFES Lab
- Class Number: 13791
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4650 - 020 TFES Lab
ME EN 4650 - 020 TFES Lab
- Class Number: 18805
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: -1
ME EN 4999 - 001 Honors Thesis/Project
ME EN 4999 - 001 Honors Thesis/Project
- Class Number: 1775
- Instructor: Acevedo, Claire
- Component: Honors Thesis Project
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5051 - 001 Microsensors
ME EN 5051 - 001 Microsensors
- Class Number:
- Instructor: KIM, HANSEUP
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $126.00
- Seats Available: 5
ME EN 5051 - 002 Microsensors
ME EN 5051 - 002 Microsensors
- Class Number: 12520
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $126.00
- Seats Available: 5
ME EN 5060 - 001 Sustain Product/Process
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 5060 - 001 Sustain Product/Process
- Class Number: 17163
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 5070 - 001 Electromec Energy Harv
ME EN 5070 - 001 Electromec Energy Harv
- Class Number: 17169
- Instructor: Roundy, Shad
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 17
ME EN 5100 - 001 Ergonomics
ME EN 5100 - 001 Ergonomics
- Class Number: 14535
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 17
ME EN 5150 - 001 Product Safety
ME EN 5150 - 001 Product Safety
- Class Number: 15358
- Instructor: DENTREMONT, KEN L
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Wait List: Yes
- Seats Available: 16
ME EN 5200 - 001 Classical Control Sys
ME EN 5200 - 001 Classical Control Sys
- Class Number: 1312
- Instructor: LEANG, KAM
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $40.00
- Seats Available: 13
ME EN 5205 - 001 System Dynamics
ME EN 5205 - 001 System Dynamics
- Class Number: 8828
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 9
ME EN 5220 - 001 Robotics
ME EN 5220 - 001 Robotics
- Class Number: 2270
- Instructor: HOLLERBACH, JOHN
- Component: Lecture
- Type: Hybrid
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 13
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
- Class Number: 8830
- Instructor: PASCUCCI, VALERIO
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 5300 - 001 Adv Mech of Materials
ME EN 5300 - 001 Adv Mech of Materials
- Class Number: 1310
- Instructor: MONSON, Ken
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 5400 - 001 Vibrations
ME EN 5400 - 001 Vibrations
- Class Number: 18825
- Instructor: WANG, PAI
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
ME EN 5510 - 001 Finite Elements
ME EN 5510 - 001 Finite Elements
- Class Number: 1311
- Instructor: HOCHHALTER, Jacob
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 9
ME EN 5530 - 001 Continuum Mechanics
ME EN 5530 - 001 Continuum Mechanics
- Class Number: 15355
- Instructor: Acevedo, Claire
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 11
Class will include a small in-person lab, times TBD the first week of class, based on student availability
- Class Number: 10733
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: Hybrid & IVC
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 9
Class will include a small in-person lab, times TBD the first week of class, based on student availability
ME EN 5650 - 001 Intermed Heat Transfer
ME EN 5650 - 001 Intermed Heat Transfer
- Class Number: 13120
- Instructor: PARK, KEUNHAN
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 1
ME EN 5700 - 001 Int Fluid Dynamics
The lecture will be online at the time indicated on the schedule and there will be an in-person lab, times to be determined by the instructor (multiple sections will be available and will be kept small).
ME EN 5700 - 001 Int Fluid Dynamics
- Class Number: 6156
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: Hybrid & IVC
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
The lecture will be online at the time indicated on the schedule and there will be an in-person lab, times to be determined by the instructor (multiple sections will be available and will be kept small).
ME EN 5730 - 001 Microfluid Chip Design
ME EN 5730 - 001 Microfluid Chip Design
- Class Number:
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 4
ME EN 5730 - 002 Microfluid Chip Design
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 5730 - 002 Microfluid Chip Design
- Class Number: 17165
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: Hybrid & IVC
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 4
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 5800 - 001 Sustainable Energy
ME EN 5800 - 001 Sustainable Energy
- Class Number: 9269
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 5910 - 001 Co-Op
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 001 Co-Op
- Class Number: 8676
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 12
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
- Class Number: 10228
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 12
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
- Class Number: 10229
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5930 - 001 Undergrad Research
Each faculty member is a assigned a unique section of ME EN 5930. Please see an advisor to apply for Undergraduate Research.
ME EN 5930 - 001 Undergrad Research
- Class Number: 4087
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is a assigned a unique section of ME EN 5930. Please see an advisor to apply for Undergraduate Research.
ME EN 5950 - 001 Independent Study
Each faculty member is a assigned a unique section of ME EN 5950. Please see an advisor to apply for Independent Study.
ME EN 5950 - 001 Independent Study
- Class Number: 2849
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is a assigned a unique section of ME EN 5950. Please see an advisor to apply for Independent Study.
ME EN 5960 - 001 Additive Manufacturing
ME EN 5960 - 001 Additive Manufacturing
- Class Number: 15366
- Instructor: Kong, Yong
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $77.00
- Seats Available: 0
ME EN 5960 - 002 Ultrasound
ME EN 5960 - 002 Ultrasound
- Class Number: 15367
- Instructor: KUBANEK, JAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 5960 - 004 Advanced Manufacturing
Please contact the instructor for a permission code.
ME EN 5960 - 004 Advanced Manufacturing
- Class Number: 7089
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $25.00
- Seats Available: 3
Please contact the instructor for a permission code.
ME EN 5960 - 005 Advanced Manufacturing
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
- Class Number: 7222
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $25.00
- Seats Available: 2
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 006 Optics for Energy
ME EN 5960 - 006 Optics for Energy
- Class Number: 11957
- Instructor: MENON, RAJESH
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 1
- Class Number: 10820
- Instructor: OSTING, BRAXTON
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 1
ME EN 6051 - 001 Microsensor
ME EN 6051 - 001 Microsensor
- Class Number:
- Instructor: KIM, HANSEUP
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $126.00
- Seats Available: 1
ME EN 6051 - 002 Microsensor
ME EN 6051 - 002 Microsensor
- Class Number: 12522
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $126.00
- Seats Available: 1
ME EN 6060 - 001 Sustain Product/Process
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 6060 - 001 Sustain Product/Process
- Class Number: 17162
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 6070 - 001 Electromec Energy Harv
ME EN 6070 - 001 Electromec Energy Harv
- Class Number: 17168
- Instructor: Roundy, Shad
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 10
ME EN 6100 - 002 Ergonomics
ME EN 6100 - 002 Ergonomics
- Class Number: 14539
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6150 - 001 Product Safety
ME EN 6150 - 001 Product Safety
- Class Number: 15679
- Instructor: DENTREMONT, KEN L
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Wait List: Yes
- Seats Available: 22
ME EN 6200 - 001 Classical Control Sys
ME EN 6200 - 001 Classical Control Sys
- Class Number: 1778
- Instructor: LEANG, KAM
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $40.00
- Seats Available: 11
ME EN 6205 - 001 System Dynamics
ME EN 6205 - 001 System Dynamics
- Class Number: 8829
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 10
ME EN 6220 - 001 Robotics
ME EN 6220 - 001 Robotics
- Class Number: 2269
- Instructor: HOLLERBACH, JOHN
- Component: Lecture
- Type: Hybrid
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 6225 - 001 Motion Planning
ME EN 6225 - 001 Motion Planning
- Class Number: 10918
- Instructor: KUNTZ, ALAN
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 6225 - 002 Motion Planning
ME EN 6225 - 002 Motion Planning
- Class Number: 19560
- Instructor: KUNTZ, ALAN
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
- Class Number: 8831
- Instructor: PASCUCCI, VALERIO
- Component: Lecture
- Type: Online
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/
ME EN 6300 - 001 Adv Mech of Materials
ME EN 6300 - 001 Adv Mech of Materials
- Class Number: 1779
- Instructor: MONSON, Ken
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
ME EN 6400 - 001 Vibrations
ME EN 6400 - 001 Vibrations
- Class Number: 18826
- Instructor: WANG, PAI
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 6510 - 001 Finite Elements
ME EN 6510 - 001 Finite Elements
- Class Number: 1780
- Instructor: HOCHHALTER, Jacob
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6530 - 001 Continuum Mechanics
ME EN 6530 - 001 Continuum Mechanics
- Class Number: 15372
- Instructor: Acevedo, Claire
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
- Class Number: 12899
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: Hybrid & IVC
- Units: 3.0
- Wait List: Yes
- Seats Available: 7
ME EN 6650 - 001 Intermed Heat Transfer
ME EN 6650 - 001 Intermed Heat Transfer
- Class Number: 13121
- Instructor: PARK, KEUNHAN
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 6700 - 001 Int Fluid Dynamics
The lecture will be online at the time indicated on the schedule and there will be an in-person lab, times to be determined by the instructor (multiple sections will be available and will be kept small).
ME EN 6700 - 001 Int Fluid Dynamics
- Class Number: 6157
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: Hybrid & IVC
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $50.00
- Seats Available: 16
The lecture will be online at the time indicated on the schedule and there will be an in-person lab, times to be determined by the instructor (multiple sections will be available and will be kept small).
ME EN 6730 - 001 Microfluid Chip Design
ME EN 6730 - 001 Microfluid Chip Design
- Class Number:
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 9
ME EN 6730 - 002 Microfluid Chip Design
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 6730 - 002 Microfluid Chip Design
- Class Number: 17167
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: Hybrid & IVC
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 9
This is a Hybrid course, which uses a mixture of online, face-to-face, and technology enhanced instruction.
ME EN 6800 - 001 Sustainable Energy
ME EN 6800 - 001 Sustainable Energy
- Class Number: 9270
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6920 - 001 Design Project
This course is available only to graduate students who are in the Design and Manufacturing Track
ME EN 6920 - 001 Design Project
- Class Number: 11946
- Instructor: RAEYMAEKERS, BART
- Component: Special Projects
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
This course is available only to graduate students who are in the Design and Manufacturing Track
ME EN 6950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 2850
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6960 - 001 Additive Manufacturing
ME EN 6960 - 001 Additive Manufacturing
- Class Number: 15370
- Instructor: Kong, Yong
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $77.00
- Seats Available: -5
ME EN 6960 - 002 Ultrasound
ME EN 6960 - 002 Ultrasound
- Class Number: 15371
- Instructor: KUBANEK, JAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 6960 - 004 Advanced Manufacturing
Please contact the instructor for a permission code to add this class.
ME EN 6960 - 004 Advanced Manufacturing
- Class Number: 7605
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $25.00
- Seats Available: 3
Please contact the instructor for a permission code to add this class.
ME EN 6960 - 005 Advanced Manufacturing
Please contact the instructor for a permission code to add this class.
ME EN 6960 - 005 Advanced Manufacturing
- Class Number: 7606
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Fees: $25.00
- Seats Available: 3
Please contact the instructor for a permission code to add this class.
ME EN 6960 - 006 Optics for Energy
ME EN 6960 - 006 Optics for Energy
- Class Number: 11958
- Instructor: MENON, RAJESH
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 4
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 1781
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1782
- Instructor: FRANCOEUR, MATHIEU
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15
ME EN 7200 - 001 Nonlinear Controls
ME EN 7200 - 001 Nonlinear Controls
- Class Number: 17176
- Instructor: MINOR, MARK ANDREW
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $20.00
- Seats Available: 9
ME EN 7500 - 001 Engin Materials Science
ME EN 7500 - 001 Engin Materials Science
- Class Number: 17171
- Instructor: KINGSTEDT, OWEN
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 7670 - 001 Adv Radiation
ME EN 7670 - 001 Adv Radiation
- Class Number: 17172
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 7960 - 001 Wearable Robotics
ME EN 7960 - 001 Wearable Robotics
- Class Number: 17175
- Instructor: LENZI, TOMMASO
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $49.00
- Seats Available: 5
ME EN 7960 - 002 TFES Seminar
ME EN 7960 - 002 TFES Seminar
- Class Number: 9261
- Instructor: PARDYJAK, ERIC
- Component: Special Topics
- Type: Interactive Video Conferencing
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 7960 - 003 Solid Mechanics Seminar
ME EN 7960 - 003 Solid Mechanics Seminar
- Class Number: 15373
- Instructor: MONSON, Ken
- Component: Special Topics
- Type: Interactive Video Conferencing
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 18
ME EN 7960 - 004 Robotics Seminar
ME EN 7960 - 004 Robotics Seminar
- Class Number: 5131
- Instructor: ABBOTT, JAKE
- Component: Special Topics
- Type: Interactive Video Conferencing
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
ME EN 7960 - 006 Low Reynolds Number Flows
ME EN 7960 - 006 Low Reynolds Number Flows
- Class Number: 17174
- Instructor: Fu, Henry
- Component: Lecture
- Type: Interactive Video Conferencing
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 2851
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 2870
- Instructor: FEHLBERG, MARK
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 15