Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEK 1560 - 801-587-8479
Graduate Studies Office
Mathieu Francoeur
MEK 1550 - 801-581-5721
Departmental Notes
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system may not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 296 - 002 Success in Mech. Engin.
ME EN 296 - 002 Success in Mech. Engin.
- Class Number: 19490
- Instructor: BARNARD, KATIE
- Instructor: Sriphong-Ngarm, MORGAN
- Component: Special Topics
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $165.00
- Seats Available: 5
ME EN 1000 - 001 Intro Desgn for Eng Sys
This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.
ME EN 1000 - 001 Intro Desgn for Eng Sys
- Class Number:
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 11
This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.
ME EN 1000 - 002 Intro Desgn for Eng Sys
ME EN 1000 - 002 Intro Desgn for Eng Sys
- Class Number: 11370
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 8
ME EN 1000 - 003 Intro Desgn for Eng Sys
ME EN 1000 - 003 Intro Desgn for Eng Sys
- Class Number: 11631
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 4
ME EN 1000 - 004 Intro Desgn for Eng Sys
ME EN 1000 - 004 Intro Desgn for Eng Sys
- Class Number: 13578
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $105.00
- Seats Available: 1
ME EN 1005 - 001 CAD Lab
Please see an academic advisor to schedule a lab time.
ME EN 1005 - 001 CAD Lab
- Class Number: 8088
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 12
Please see an academic advisor to schedule a lab time.
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
- Class Number:
- Instructor: MASCARO, DEBRA J
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: -2
This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
- Class Number: 7922
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 003 Cmptr Prob Solv Eng Sys
ME EN 1010 - 003 Cmptr Prob Solv Eng Sys
- Class Number: 7923
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: -2
ME EN 1010 - 004 Cmptr Prob Solv Eng Sys
ME EN 1010 - 004 Cmptr Prob Solv Eng Sys
- Class Number: 7924
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 005 Cmptr Prob Solv Eng Sys
ME EN 1010 - 005 Cmptr Prob Solv Eng Sys
- Class Number: 7925
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 006 Cmptr Prob Solv Eng Sys
ME EN 1010 - 006 Cmptr Prob Solv Eng Sys
- Class Number: 7926
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 007 Cmptr Prob Solv Eng Sys
ME EN 1010 - 007 Cmptr Prob Solv Eng Sys
- Class Number: 7927
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 1
ME EN 1010 - 008 Cmptr Prob Solv Eng Sys
ME EN 1010 - 008 Cmptr Prob Solv Eng Sys
- Class Number: 8313
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: -1
ME EN 2010 - 001 Statics
Sections 2, 3, 4 belong to this lecture. This course requires registration for a discussion section. Students will be automatically registered for this lecture section when registering for the pertinent discussion section. Supplemental Instruction (SI) is attached to this section. SI provides free, organized group study sessions in which students actively focus on course content, test preparation, and study skills. SI is facilitated by trained student SI leaders. SI session times are determined the first week of class. See https://learningcenter.utah.edu/supplemental/index.php for more information.
ME EN 2010 - 001 Statics
- Class Number:
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
Sections 2, 3, 4 belong to this lecture. This course requires registration for a discussion section. Students will be automatically registered for this lecture section when registering for the pertinent discussion section. Supplemental Instruction (SI) is attached to this section. SI provides free, organized group study sessions in which students actively focus on course content, test preparation, and study skills. SI is facilitated by trained student SI leaders. SI session times are determined the first week of class. See https://learningcenter.utah.edu/supplemental/index.php for more information.
ME EN 2010 - 002 Statics
ME EN 2010 - 002 Statics
- Class Number: 15758
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: -1
ME EN 2010 - 003 Statics
ME EN 2010 - 003 Statics
- Class Number: 17527
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
ME EN 2010 - 004 Statics
ME EN 2010 - 004 Statics
- Class Number: 15780
- Instructor: COATS, BRITTANY
- Component: Discussion
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 28
ME EN 2030 - 001 Dynamics
ME EN 2030 - 001 Dynamics
- Class Number: 1236
- Instructor: FEHLBERG, MARK
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 14
ME EN 2450 - 001 Num Methods for Eng Sys
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 2450 - 001 Num Methods for Eng Sys
- Class Number:
- Instructor: HOCHHALTER, Jacob
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 20
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 2450 - 002 Num Methods for Eng Sys
ME EN 2450 - 002 Num Methods for Eng Sys
- Class Number: 10401
- Instructor: HOCHHALTER, Jacob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 2450 - 003 Num Methods for Eng Sys
ME EN 2450 - 003 Num Methods for Eng Sys
- Class Number: 10402
- Instructor: HOCHHALTER, Jacob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 2450 - 004 Num Methods for Eng Sys
ME EN 2450 - 004 Num Methods for Eng Sys
- Class Number: 12297
- Instructor: HOCHHALTER, Jacob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 2450 - 005 Num Methods for Eng Sys
ME EN 2450 - 005 Num Methods for Eng Sys
- Class Number: 13544
- Instructor: HOCHHALTER, Jacob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 2450 - 006 Num Methods for Eng Sys
ME EN 2450 - 006 Num Methods for Eng Sys
- Class Number: 14131
- Instructor: HOCHHALTER, Jacob
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 2550 - 001 Prob & Stats for Eng
ME EN 2550 - 001 Prob & Stats for Eng
- Class Number: 13016
- Instructor: Roundy, Shad
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 60
ME EN 2650 - 001 Manufact for Eng Sys
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 2650 - 001 Manufact for Eng Sys
- Class Number:
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 57
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 2650 - 002 Manufact for Eng Sys
ME EN 2650 - 002 Manufact for Eng Sys
- Class Number: 11199
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 20
ME EN 2650 - 003 Manufact for Eng Sys
ME EN 2650 - 003 Manufact for Eng Sys
- Class Number: 11200
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 0
ME EN 2650 - 005 Manufact for Eng Sys
ME EN 2650 - 005 Manufact for Eng Sys
- Class Number: 11201
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 2650 - 006 Manufact for Eng Sys
ME EN 2650 - 006 Manufact for Eng Sys
- Class Number: 11202
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 2650 - 007 Manufact for Eng Sys
ME EN 2650 - 007 Manufact for Eng Sys
- Class Number: 11203
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 10
ME EN 2650 - 008 Manufact for Eng Sys
This lab section is ONLY for students who have passed either ME EN 2655 or ME EN 2660 with a C or better.
ME EN 2650 - 008 Manufact for Eng Sys
- Class Number: 11241
- Instructor: BALAJI, A.K.
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 28
This lab section is ONLY for students who have passed either ME EN 2655 or ME EN 2660 with a C or better.
ME EN 2960 - 001 Foundations of Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.
ME EN 2960 - 001 Foundations of Microsystems
- Class Number: 9103
- Instructor: GOENNER, BRADY
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $85.00
- Seats Available: 2
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.
ME EN 2960 - 002 Success in Mechanical Engineer
ME EN 2960 - 002 Success in Mechanical Engineer
- Class Number: 17798
- Instructor: BARNARD, KATIE
- Instructor: Sriphong-Ngarm, MORGAN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $15.00
- Seats Available: 18
ME EN 2960 - 003 Foundations of Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.
ME EN 2960 - 003 Foundations of Microsystems
- Class Number: 10569
- Instructor: GOENNER, BRADY
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: Yes
- Fees: $85.00
- Seats Available: 0
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.
ME EN 3000 - 001 Design of Mech Elements
ME EN 3000 - 001 Design of Mech Elements
- Class Number: 9108
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $5.00
- Seats Available: 66
ME EN 3220 - 001 Dynamic Sys & Control
ME EN 3220 - 001 Dynamic Sys & Control
- Class Number: 13008
- Instructor: LEANG, KAM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 21
ME EN 3230 - 001 Mechatronics
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 3230 - 001 Mechatronics
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 17
This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 3230 - 002 Mechatronics
ME EN 3230 - 002 Mechatronics
- Class Number: 15169
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 3
ME EN 3230 - 003 Mechatronics
ME EN 3230 - 003 Mechatronics
- Class Number: 15170
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 1
ME EN 3230 - 004 Mechatronics
ME EN 3230 - 004 Mechatronics
- Class Number: 15171
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 2
ME EN 3230 - 005 Mechatronics
ME EN 3230 - 005 Mechatronics
- Class Number: 15172
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -2
ME EN 3230 - 006 Mechatronics
ME EN 3230 - 006 Mechatronics
- Class Number: 15173
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 0
ME EN 3230 - 007 Mechatronics
ME EN 3230 - 007 Mechatronics
- Class Number: 15174
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -1
ME EN 3230 - 008 Mechatronics
ME EN 3230 - 008 Mechatronics
- Class Number: 15175
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: -2
ME EN 3230 - 009 Mechatronics
ME EN 3230 - 009 Mechatronics
- Class Number: 15176
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $200.00
- Seats Available: 16
ME EN 3300 - 001 Strength Of Materials
This course requires enrollment in a corresponding lab section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 3300 - 001 Strength Of Materials
- Class Number:
- Instructor: KINGSTEDT, OWEN
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 10
This course requires enrollment in a corresponding lab section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course.
ME EN 3300 - 002 Strength Of Materials
ME EN 3300 - 002 Strength Of Materials
- Class Number: 1412
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 1
ME EN 3300 - 003 Strength Of Materials
ME EN 3300 - 003 Strength Of Materials
- Class Number: 1413
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3300 - 004 Strength Of Materials
ME EN 3300 - 004 Strength Of Materials
- Class Number: 1414
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: -1
ME EN 3300 - 005 Strength Of Materials
ME EN 3300 - 005 Strength Of Materials
- Class Number: 1415
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 3
ME EN 3300 - 007 Strength Of Materials
ME EN 3300 - 007 Strength Of Materials
- Class Number: 11050
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: -1
ME EN 3300 - 008 Strength Of Materials
ME EN 3300 - 008 Strength Of Materials
- Class Number: 11051
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 1
ME EN 3300 - 009 Strength Of Materials
ME EN 3300 - 009 Strength Of Materials
- Class Number: 16388
- Instructor: KINGSTEDT, OWEN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 0
ME EN 3400 - 001 Prof Comm for MEs
ME EN 3400 - 001 Prof Comm for MEs
- Class Number: 13037
- Instructor: COBURN, John
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 3400 - 002 Prof Comm for MEs
ME EN 3400 - 002 Prof Comm for MEs
- Class Number: 15164
- Instructor: ASKREN, RUSS
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 9
ME EN 3400 - 003 Prof Comm for MEs
ME EN 3400 - 003 Prof Comm for MEs
- Class Number: 17497
- Instructor: BOOTH, AUSTIN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 2
ME EN 3400 - 004 Prof Comm for MEs
ME EN 3400 - 004 Prof Comm for MEs
- Class Number: 17498
- Instructor: COBURN, John
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 8
ME EN 3610 - 001 Thermodynamics
ME EN 3610 - 001 Thermodynamics
- Class Number: 13017
- Instructor: PARK, KEUNHAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: -3
ME EN 3610 - 002 Thermodynamics
ME EN 3610 - 002 Thermodynamics
- Class Number: 17499
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 32
ME EN 3710 - 001 Fluid Mechanics
ME EN 3710 - 001 Fluid Mechanics
- Class Number: 15165
- Instructor: STOLL, Rob
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 34
ME EN 3710 - 002 Fluid Mechanics
ME EN 3710 - 002 Fluid Mechanics
- Class Number: 15166
- Instructor: Fu, Henry
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: -1
ME EN 3950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participation Request form (available in MEK 1560) and return it to the ME Undergraduate Advising Office (MEK 1560) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 3950 - 001 Indep Study
- Class Number: 9009
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participation Request form (available in MEK 1560) and return it to the ME Undergraduate Advising Office (MEK 1560) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 4000 - 001 Engineering Design I
ME EN 4000 - 001 Engineering Design I
- Class Number: 10845
- Instructor: Kong, Yong
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 26
ME EN 4010 - 001 Engineering Design II
ME EN 4010 - 001 Engineering Design II
- Class Number: 2240
- Instructor: TAN, Wenda
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 23
ME EN 4610 - 001 Heat Transfer
ME EN 4610 - 001 Heat Transfer
- Class Number: 15182
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 4650 - 001 TFES Lab
Sections 2-11 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 4650 - 001 TFES Lab
- Class Number:
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 22
Sections 2-11 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.
ME EN 4650 - 002 TFES Lab
ME EN 4650 - 002 TFES Lab
- Class Number: 15592
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4650 - 003 TFES Lab
ME EN 4650 - 003 TFES Lab
- Class Number: 15593
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 5
ME EN 4650 - 004 TFES Lab
ME EN 4650 - 004 TFES Lab
- Class Number: 15594
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 4
ME EN 4650 - 005 TFES Lab
ME EN 4650 - 005 TFES Lab
- Class Number: 15595
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4650 - 006 TFES Lab
ME EN 4650 - 006 TFES Lab
- Class Number: 15596
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 1
ME EN 4650 - 008 TFES Lab
ME EN 4650 - 008 TFES Lab
- Class Number: 15597
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 5
ME EN 4650 - 009 TFES Lab
ME EN 4650 - 009 TFES Lab
- Class Number: 15598
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4650 - 010 TFES Lab
ME EN 4650 - 010 TFES Lab
- Class Number: 15599
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 3
ME EN 4650 - 011 TFES Lab
ME EN 4650 - 011 TFES Lab
- Class Number: 15600
- Instructor: DILLON, M
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $175.00
- Seats Available: 0
ME EN 4999 - 001 Honors Thesis/Project
ME EN 4999 - 001 Honors Thesis/Project
- Class Number: 1498
- Instructor: CHEN, KUAN
- Component: Honors Thesis Project
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
- Class Number: 15367
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: Yes
- Seats Available: 14
ME EN 5050 - 001 Micromachining
Sections 2-3 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5050 - 001 Micromachining
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $150.00
- Seats Available: 43
Sections 2-3 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5050 - 002 Micromachining
ME EN 5050 - 002 Micromachining
- Class Number: 9536
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $150.00
- Seats Available: 20
ME EN 5055 - 001 Microsystems Des & Char
ME EN 5055 - 001 Microsystems Des & Char
- Class Number: 10849
- Instructor: SANT, HIMANSHU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $128.00
- Seats Available: 7
ME EN 5210 - 001 State Space Control
ME EN 5210 - 001 State Space Control
- Class Number: 3967
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $40.00
- Seats Available: 17
- Class Number: 8290
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $40.00
- Seats Available: 14
ME EN 5400 - 001 Vibrations
ME EN 5400 - 001 Vibrations
- Class Number: 17502
- Instructor: GUILKEY, JAMES
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 10
ME EN 5520 - 001 Composite Mat'ls
ME EN 5520 - 001 Composite Mat'ls
- Class Number: 2241
- Instructor: CZABAJ, Michael
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 50
- Class Number: 17489
- Instructor: Acevedo, Claire
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 5540 - 001 Biomechanics II
ME EN 5540 - 001 Biomechanics II
- Class Number: 9808
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 9
ME EN 5600 - 001 Intermediate Thermo.
ME EN 5600 - 001 Intermediate Thermo.
- Class Number: 15180
- Instructor: AMEEL, TIM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 7
ME EN 5730 - 001 Microfluid Chip Design
ME EN 5730 - 001 Microfluid Chip Design
- Class Number:
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 7
ME EN 5730 - 002 Microfluid Chip Design
ME EN 5730 - 002 Microfluid Chip Design
- Class Number: 18719
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 7
ME EN 5790 - 001 Energy Systems Analysis
ME EN 5790 - 001 Energy Systems Analysis
- Class Number: 17501
- Instructor: SMITH, AMANDA D
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 4
ME EN 5830 - 001 Aero Propulsion
ME EN 5830 - 001 Aero Propulsion
- Class Number: 17503
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 22
ME EN 5910 - 001 Co-Op
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 001 Co-Op
- Class Number: 9475
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 13
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
- Class Number: 10851
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 8
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
- Class Number: 10852
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 13
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5930 - 001 Undergrad Research
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Research
- Class Number: 1502
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Independent Study
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Independent Study
- Class Number: 2763
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5960 - 003 Wind Energy
ME EN 5960 - 003 Wind Energy
- Class Number: 17504
- Instructor: CALAF, MARC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 17
ME EN 5960 - 004 Advanced Manufacturing
Please contact the instructor directly for a permission code.
ME EN 5960 - 004 Advanced Manufacturing
- Class Number: 6140
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 3
Please contact the instructor directly for a permission code.
ME EN 5960 - 005 Advanced Manufacturing
Please contact the instructor directly for a permission code.
ME EN 5960 - 005 Advanced Manufacturing
- Class Number: 7570
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 1
Please contact the instructor directly for a permission code.
- Class Number: 15368
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: Yes
- Seats Available: 5
ME EN 6050 - 001 Micromachining
Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 6050 - 001 Micromachining
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $150.00
- Seats Available: 5
Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 6050 - 002 Micromachining
ME EN 6050 - 002 Micromachining
- Class Number: 9535
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6055 - 001 Microsystems Des & Char
ME EN 6055 - 001 Microsystems Des & Char
- Class Number: 10850
- Instructor: SANT, HIMANSHU
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $128.00
- Seats Available: 5
ME EN 6140 - 001 Occupat Health & Safety
This class meets in the Rocky Mountain Center for Occupational and Environmental Health.
ME EN 6140 - 001 Occupat Health & Safety
- Class Number: 8457
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $150.00
- Seats Available: 0
This class meets in the Rocky Mountain Center for Occupational and Environmental Health.
ME EN 6210 - 001 State Space Control
ME EN 6210 - 001 State Space Control
- Class Number: 3968
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 11
- Class Number: 8291
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 17
ME EN 6240 - 001 Advanced Mechatronics
There will be no undergraduate section this semester as it is an advanced course. Undergraduates can request a permission code from the instructor if you wish to take this course.
ME EN 6240 - 001 Advanced Mechatronics
- Class Number:
- Instructor: LENZI, TOMMASO
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $95.00
- Seats Available: 1
There will be no undergraduate section this semester as it is an advanced course. Undergraduates can request a permission code from the instructor if you wish to take this course.
ME EN 6240 - 002 Advanced Mechatronics
ME EN 6240 - 002 Advanced Mechatronics
- Class Number: 18717
- Instructor: LENZI, TOMMASO
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $95.00
- Seats Available: 1
ME EN 6400 - 001 Vibrations
ME EN 6400 - 001 Vibrations
- Class Number: 17512
- Instructor: GUILKEY, JAMES
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
ME EN 6520 - 001 Composite Mat'ls
ME EN 6520 - 001 Composite Mat'ls
- Class Number: 2242
- Instructor: CZABAJ, Michael
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 25
- Class Number: 17509
- Instructor: Acevedo, Claire
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 14
ME EN 6540 - 001 Biomechanics II
ME EN 6540 - 001 Biomechanics II
- Class Number: 10406
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6600 - 001 Intermediate Thermo.
ME EN 6600 - 001 Intermediate Thermo.
- Class Number: 15185
- Instructor: AMEEL, TIM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 6730 - 001 Microfluid Chip Design
ME EN 6730 - 001 Microfluid Chip Design
- Class Number:
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 13
ME EN 6730 - 002 Microfluid Chip Design
ME EN 6730 - 002 Microfluid Chip Design
- Class Number: 18721
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Fees: $100.00
- Seats Available: 13
ME EN 6790 - 001 Energy Systems Analysis
ME EN 6790 - 001 Energy Systems Analysis
- Class Number: 18331
- Instructor: SMITH, AMANDA D
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: Yes
- Seats Available: 5
ME EN 6830 - 001 Aero Propulsion
ME EN 6830 - 001 Aero Propulsion
- Class Number: 17506
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
ME EN 6920 - 001 Design Project
This course is available only to graduate students who are in the Design and Manufacturing Track
ME EN 6920 - 001 Design Project
- Class Number: 12312
- Instructor: TAN, Wenda
- Component: Special Projects
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 2
This course is available only to graduate students who are in the Design and Manufacturing Track
ME EN 6950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 1503
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 1504
- Instructor: GALE, BRUCE
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6960 - 003 Wind Energy
ME EN 6960 - 003 Wind Energy
- Class Number: 13009
- Instructor: CALAF, MARC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $75.00
- Seats Available: 9
ME EN 6960 - 005 Advanced Manufacturing
ME EN 6960 - 005 Advanced Manufacturing
- Class Number: 7889
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 3
ME EN 6960 - 006 Advanced Manufacturing
ME EN 6960 - 006 Advanced Manufacturing
- Class Number: 7890
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: Yes
- Fees: $25.00
- Seats Available: 0
ME EN 6960 - 007 Nanofabrication
This course introduces students to fundamental processes involved in the fabrication of nano-scale materials, structures, and devices. A lab component provides students with hands-on exposure to several nanofabrication techniques available at the University of Utah Nanofab.
ME EN 6960 - 007 Nanofabrication
- Class Number:
- Instructor: WARREN, ROSEANNE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $150.00
- Seats Available: 6
This course introduces students to fundamental processes involved in the fabrication of nano-scale materials, structures, and devices. A lab component provides students with hands-on exposure to several nanofabrication techniques available at the University of Utah Nanofab.
ME EN 6960 - 008 Nanofabrication
ME EN 6960 - 008 Nanofabrication
- Class Number: 18902
- Instructor: WARREN, ROSEANNE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 1505
- Instructor: GALE, BRUCE
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1506
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6981 - 001 Faculty Consult - CPT
ME EN 6981 - 001 Faculty Consult - CPT
- Class Number: 13941
- Instructor: FRANCOEUR, MATHIEU
- Component: Practicum
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 7110 - 001 System Safety
ME EN 7110 - 001 System Safety
- Class Number: 17508
- Instructor: DENTREMONT, KEN L
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 13
ME EN 7120 - 001 Functional Anatomy
Wednesday class will meet in HPEB 209. To be added to the waitlist, please send an email to liz.reiser@mech.utah.edu with your name, unid, department, degree program (MS, PhD) and an email address to be contacted at.
ME EN 7120 - 001 Functional Anatomy
- Class Number: 17488
- Instructor: Foreman, Bo
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $300.00
- Seats Available: 3
Wednesday class will meet in HPEB 209. To be added to the waitlist, please send an email to liz.reiser@mech.utah.edu with your name, unid, department, degree program (MS, PhD) and an email address to be contacted at.
ME EN 7210 - 001 Optimal Controls
ME EN 7210 - 001 Optimal Controls
- Class Number: 17514
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Fees: $20.00
- Seats Available: 10
ME EN 7240 - 001 Haptics
ME EN 7240 - 001 Haptics
- Class Number: 17500
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 6
ME EN 7525 - 001 Inelasticity
ME EN 7525 - 001 Inelasticity
- Class Number: 17496
- Instructor: NEWELL, PANIA
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 13
ME EN 7530 - 001 Fracture and Fatigue
ME EN 7530 - 001 Fracture and Fatigue
- Class Number: 17510
- Instructor: SPEAR, ASHLEY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 3
ME EN 7650 - 001 Adv Conduction
ME EN 7650 - 001 Adv Conduction
- Class Number: 17511
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 14
ME EN 7710 - 001 Env Fluid Dynamics
ME EN 7710 - 001 Env Fluid Dynamics
- Class Number: 17515
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 12
ME EN 7960 - 001 TFES Seminar
This is a seminar class.
ME EN 7960 - 001 TFES Seminar
- Class Number: 5905
- Instructor: CALAF, MARC
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 16
This is a seminar class.
ME EN 7960 - 002 Robotics Seminar
ME EN 7960 - 002 Robotics Seminar
- Class Number: 7487
- Instructor: HOLLERBACH, JOHN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 20
ME EN 7960 - 004 Low-Dimensional Materials
This course will provide a fundamental understanding and hands-on experience of low dimensional materials, including nanofiber and 2D materials. Distinct nanofabrication and nano-analytical methods dedicated to low dimensional materials will be taught as well. Furthermore, characteristic properties of selected materials will be discussed in more details from the fundamental as well as application aspects.
ME EN 7960 - 004 Low-Dimensional Materials
- Class Number: 15249
- Instructor: CHANG, JIYOUNG
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: Yes
- Seats Available: 5
This course will provide a fundamental understanding and hands-on experience of low dimensional materials, including nanofiber and 2D materials. Distinct nanofabrication and nano-analytical methods dedicated to low dimensional materials will be taught as well. Furthermore, characteristic properties of selected materials will be discussed in more details from the fundamental as well as application aspects.
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 1507
- Instructor: GALE, BRUCE
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 1508
- Instructor: GALE, BRUCE
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
- Class Number: 1509
- Instructor: GALE, BRUCE
- Component: Continuing Registration
- Type: In Person
- Units: 0.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.