Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
A.K. Balaji
MEB 2110 - (801)585-6414
Departmental Notes
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system may not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 1300 - 001 Statics/Strength
ME EN 1300 - 001 Statics/Strength
- Class Number: 1042
- Instructor: SAFFIOTI, JAMI
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 2020 - 001 Particle Dynamics
This class meets with ME EN 2080-001.
ME EN 2020 - 001 Particle Dynamics
- Class Number: 5670
- Instructor: LEON, LISANDRO
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
This class meets with ME EN 2080-001.
ME EN 2080 - 001 Dynamics
ME EN 2080 - 001 Dynamics
- Class Number: 5669
- Instructor: LEON, LISANDRO
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 30
ME EN 2300 - 001 Thermodynamics I
ME EN 2300 - 001 Thermodynamics I
- Class Number: 8134
- Instructor: MARIC, EMINA
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 2655 - 002 Manufacturing Lab
ME EN 2655 - 002 Manufacturing Lab
- Class Number: 4650
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 2
ME EN 2655 - 003 Manufacturing Lab
ME EN 2655 - 003 Manufacturing Lab
- Class Number: 4651
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2655 - 004 Manufacturing Lab
Meets with ME EN 2660-001
ME EN 2655 - 004 Manufacturing Lab
- Class Number: 4652
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
Meets with ME EN 2660-001
ME EN 2655 - 006 Manufacturing Lab
Meets with ME EN 2660-002
ME EN 2655 - 006 Manufacturing Lab
- Class Number: 4654
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
Meets with ME EN 2660-002
ME EN 2655 - 007 Manufacturing Lab
ME EN 2655 - 007 Manufacturing Lab
- Class Number: 4655
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
ME EN 2655 - 008 Manufacturing Lab
ME EN 2655 - 008 Manufacturing Lab
- Class Number: 4656
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2660 - 001 Machining Laboratory
ME EN 2660 is only for students who took both ME EN 1000 and ME EN 1010 at the University of Utah prior to Fall 2013. Students who took ME EN 1000 in Fall 2013 must take ME EN 2655 instead. Meets with ME EN 2655-004
ME EN 2660 - 001 Machining Laboratory
- Class Number: 6258
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 2
ME EN 2660 is only for students who took both ME EN 1000 and ME EN 1010 at the University of Utah prior to Fall 2013. Students who took ME EN 1000 in Fall 2013 must take ME EN 2655 instead. Meets with ME EN 2655-004
ME EN 2660 - 002 Machining Laboratory
ME EN 2660 is only for students who took both ME EN 1000 and ME EN 1010 at the University of Utah prior to Fall 2013. Students who took ME EN 1000 in Fall 2013 must take ME EN 2655 instead. Meets with ME EN 2655-006
ME EN 2660 - 002 Machining Laboratory
- Class Number: 6259
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 3
ME EN 2660 is only for students who took both ME EN 1000 and ME EN 1010 at the University of Utah prior to Fall 2013. Students who took ME EN 1000 in Fall 2013 must take ME EN 2655 instead. Meets with ME EN 2655-006
ME EN 5510 - 001 Finite Elements
ME EN 5510 - 001 Finite Elements
- Class Number: 1830
- Instructor: FULLER, TIM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 23
ME EN 5910 - 079 Co-Op
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu.)
ME EN 5910 - 079 Co-Op
- Class Number: 1119
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 3
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu.)
ME EN 5920 - 001 Design Project
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5920 - 001 Design Project
- Class Number: 1970
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5930 - 001 Undergrad Thesis
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5930 - 001 Undergrad Thesis
- Class Number: 2375
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5950 - 001 Indep Study
- Class Number: 2324
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class with the class number.
ME EN 5960 - 001 Project Mgt in a Tech Environ
ME EN 5960 - 001 Project Mgt in a Tech Environ
- Class Number: 3773
- Instructor: BLINN, MICHAEL P
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 5960 - 002 Advanced Machining
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 5960 - 002 Advanced Machining
- Class Number: 4674
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 5960 - 003 Advanced Machining
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 5960 - 003 Advanced Machining
- Class Number: 4888
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
This class meets between 9:00AM - 12:00PM on Thursdays in MEB 1221. Please contact the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 6510 - 001 Finite Elements
ME EN 6510 - 001 Finite Elements
- Class Number: 1831
- Instructor: FULLER, TIM
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 25
ME EN 6950 - 001 Indep Study
Each faculty is assigned a unique section of ME EN 6950. Please see your faculty advisor for the class number for his/her section. You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 6208
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty is assigned a unique section of ME EN 6950. Please see your faculty advisor for the class number for his/her section. You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 1159
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6960 - 001 Manufacturing Practices
ME EN 6960 - 001 Manufacturing Practices
- Class Number: 3761
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 6960 - 002 Project Mgt in a Tech Environ
ME EN 6960 - 002 Project Mgt in a Tech Environ
- Class Number: 3774
- Instructor: BLINN, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 6960 - 005 Advanced Machining
Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 6960 - 005 Advanced Machining
- Class Number: 4938
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 6960 - 006 Advanced Machining
Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 6960 - 006 Advanced Machining
- Class Number: 4939
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
Please talk to the instructor to be placed on the registration list. To determine the last day to drop this miscellaneous course, see http://registrar.utah.edu/handbook/drop.php or contact the Registrar's Office at (801)581-8969.
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the class number for his/her section. You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 6243
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the class number for his/her section. You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1160
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 6970. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 1161
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6970. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 1162
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. Your will then register by adding a class by class number.