Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
A.K. Balaji
MEB 2110 - (801)585-6414
Departmental Notes
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 1005 - 001 CAD Lab
ME EN 1005 - 001 CAD Lab
- Class Number: 12186
- Instructor: SHORTI, RAMI M
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 1010 - 001 Intro Robot Sys Des II
This course requires enrollment in a corresponding lab section. Sections 2-8 are associated with this lecture section. If necessary, the ME EN 1010 enrollment cap will be increased during the first week of the spring semester.
ME EN 1010 - 001 Intro Robot Sys Des II
- Class Number: 11671
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -3
This course requires enrollment in a corresponding lab section. Sections 2-8 are associated with this lecture section. If necessary, the ME EN 1010 enrollment cap will be increased during the first week of the spring semester.
ME EN 1010 - 002 Intro Robot Sys Des II
ME EN 1010 - 002 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 003 Intro Robot Sys Des II
ME EN 1010 - 003 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -4
ME EN 1010 - 004 Intro Robot Sys Des II
ME EN 1010 - 004 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -4
ME EN 1010 - 005 Intro Robot Sys Des II
ME EN 1010 - 005 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 1010 - 006 Intro Robot Sys Des II
ME EN 1010 - 006 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 4
ME EN 1010 - 007 Intro Robot Sys Des II
ME EN 1010 - 007 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 1010 - 008 Intro Robot Sys Des II
ME EN 1010 - 008 Intro Robot Sys Des II
- Class Number:
- Instructor: MASCARO, DEBRA J
- Instructor: MASCARO, STEPHEN A
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 1300 - 001 Statics/Strength
ME EN 1300 - 001 Statics/Strength
- Class Number: 1128
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 2020 - 001 Particle Dynamics
This class meets with ME EN 2080-001 in WEB L101.
ME EN 2020 - 001 Particle Dynamics
- Class Number: 1853
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
This class meets with ME EN 2080-001 in WEB L101.
ME EN 2080 - 001 Dynamics
This class meets with ME EN 2020-001.
ME EN 2080 - 001 Dynamics
- Class Number: 1129
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
This class meets with ME EN 2020-001.
ME EN 2510 - 001 Intro Energy Sys Des II
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.
ME EN 2510 - 001 Intro Energy Sys Des II
- Class Number: 12703
- Instructor: ROEMER, ROBERT
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 10
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.
ME EN 2510 - 002 Intro Energy Sys Des II
ME EN 2510 - 002 Intro Energy Sys Des II
- Class Number:
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 4
ME EN 2510 - 004 Intro Energy Sys Des II
ME EN 2510 - 004 Intro Energy Sys Des II
- Class Number:
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: -2
ME EN 2510 - 005 Intro Energy Sys Des II
ME EN 2510 - 005 Intro Energy Sys Des II
- Class Number:
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 4
ME EN 2510 - 006 Intro Energy Sys Des II
ME EN 2510 - 006 Intro Energy Sys Des II
- Class Number:
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 0
ME EN 2510 - 007 Intro Energy Sys Des II
ME EN 2510 - 007 Intro Energy Sys Des II
- Class Number:
- Instructor: ROEMER, ROBERT
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 3
ME EN 2655 - 002 Manufacturing Lab
ME EN 2655 - 002 Manufacturing Lab
- Class Number: 9717
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
ME EN 2655 - 003 Manufacturing Lab
ME EN 2655 - 003 Manufacturing Lab
- Class Number: 12671
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
ME EN 2655 - 004 Manufacturing Lab
ME EN 2655 - 004 Manufacturing Lab
- Class Number: 9718
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 2
ME EN 2655 - 005 Manufacturing Lab
ME EN 2655 - 005 Manufacturing Lab
- Class Number: 9719
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2660 - 001 Machining Laboratory
ME EN 2660 - 001 Machining Laboratory
- Class Number: 14386
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 2660 - 002 Machining Laboratory
ME EN 2660 - 002 Machining Laboratory
- Class Number: 14387
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 2660 - 003 Machining Laboratory
ME EN 2660 - 003 Machining Laboratory
- Class Number: 14388
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 2660 - 004 Machining Laboratory
ME EN 2660 - 004 Machining Laboratory
- Class Number: 14389
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 2
ME EN 2950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 2950. Complete a Course Participation Request form (available in MEB 2220) and return it to ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 2950 - 001 Indep Study
- Class Number: 14390
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 2950. Complete a Course Participation Request form (available in MEB 2220) and return it to ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 2960 - 001 Found. Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.
ME EN 2960 - 001 Found. Microsystems
- Class Number: 14792
- Instructor: BAKER, BRIAN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: -1
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.
ME EN 2960 - 003 Found. Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.
ME EN 2960 - 003 Found. Microsystems
- Class Number: 18140
- Instructor: BAKER, BRIAN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: 2
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.
ME EN 3000 - 001 Design of Mech Elements
ME EN 3000 - 001 Design of Mech Elements
- Class Number: 14842
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $5.00
- Seats Available: 3
ME EN 3210 - 001 Mechatronics II
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.
ME EN 3210 - 001 Mechatronics II
- Class Number: 2731
- Instructor: MINOR, MARK ANDREW
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 11
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.
ME EN 3210 - 002 Mechatronics II
ME EN 3210 - 002 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3210 - 003 Mechatronics II
ME EN 3210 - 003 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3210 - 004 Mechatronics II
ME EN 3210 - 004 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 2
ME EN 3210 - 005 Mechatronics II
ME EN 3210 - 005 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3210 - 006 Mechatronics II
ME EN 3210 - 006 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3210 - 007 Mechatronics II
ME EN 3210 - 007 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3210 - 008 Mechatronics II
ME EN 3210 - 008 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3210 - 009 Mechatronics II
ME EN 3210 - 009 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -1
ME EN 3210 - 010 Mechatronics II
ME EN 3210 - 010 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3210 - 011 Mechatronics II
ME EN 3210 - 011 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 5
ME EN 3210 - 012 Mechatronics II
ME EN 3210 - 012 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3210 - 013 Mechatronics II
ME EN 3210 - 013 Mechatronics II
- Class Number:
- Instructor: MINOR, MARK ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3300 - 001 Strength Of Materials
This course requires enrollment in a corresponding lab section. Sections 2-6 are associated with this lecture section.
ME EN 3300 - 001 Strength Of Materials
- Class Number: 1130
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 10
This course requires enrollment in a corresponding lab section. Sections 2-6 are associated with this lecture section.
ME EN 3300 - 002 Strength Of Materials
ME EN 3300 - 002 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 1
ME EN 3300 - 003 Strength Of Materials
ME EN 3300 - 003 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 004 Strength Of Materials
ME EN 3300 - 004 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 3
ME EN 3300 - 005 Strength Of Materials
ME EN 3300 - 005 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 7
ME EN 3300 - 006 Strength Of Materials
ME EN 3300 - 006 Strength Of Materials
- Class Number:
- Instructor: DEVRIES, LARRY
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 1
ME EN 3650 - 001 Heat Transfer
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.
ME EN 3650 - 001 Heat Transfer
- Class Number: 1131
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 1
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.
ME EN 3650 - 002 Heat Transfer
ME EN 3650 - 002 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 1
ME EN 3650 - 003 Heat Transfer
ME EN 3650 - 003 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3650 - 004 Heat Transfer
ME EN 3650 - 004 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3650 - 005 Heat Transfer
ME EN 3650 - 005 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3650 - 006 Heat Transfer
ME EN 3650 - 006 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 7
ME EN 3650 - 007 Heat Transfer
ME EN 3650 - 007 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3650 - 008 Heat Transfer
ME EN 3650 - 008 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3650 - 009 Heat Transfer
ME EN 3650 - 009 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 11
ME EN 3650 - 010 Heat Transfer
ME EN 3650 - 010 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 3
ME EN 3650 - 011 Heat Transfer
ME EN 3650 - 011 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3650 - 012 Heat Transfer
ME EN 3650 - 012 Heat Transfer
- Class Number:
- Instructor: FRANCOEUR, MATHIEU
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participatio Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 3950 - 001 Indep Study
- Class Number: 14395
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participatio Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 4010 - 001 Engineering Design II
ME EN 4010 - 001 Engineering Design II
- Class Number: 2734
- Instructor: Roundy, Shad
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $81.00
- Seats Available: 27
ME EN 4050 - 001 Concurrent Eng. II
ME EN 4050 - 001 Concurrent Eng. II
- Class Number: 2737
- Instructor: CLARK, PAUL
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 57
ME EN 4999 - 001 Honors Thesis/Project
ME EN 4999 - 001 Honors Thesis/Project
- Class Number: 1565
- Instructor: CHEN, KUAN
- Component: Honors Thesis Project
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 5010 - 001 Manufacturing Process
ME EN 5010 - 001 Manufacturing Process
- Class Number: 17514
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 17
ME EN 5030 - 001 Reliability Engr
ME EN 5030 - 001 Reliability Engr
- Class Number: 16191
- Instructor: BLINN, MICHAEL P
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 5050 - 001 Micromachining
Section 2 belongs to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5050 - 001 Micromachining
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Instructor: VALLURI, PRITHVI SAI
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 13
Section 2 belongs to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5050 - 002 Micromachining
ME EN 5050 - 002 Micromachining
- Class Number: 16325
- Instructor: CHAPPANDA NANAIAH, KARUMBAIAH
- Instructor: RAHMAN, MAHBUBUR
- Instructor: SOLZBACHER, FLORIAN
- Instructor: VALLURI, PRITHVI SAI
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 13
ME EN 5210 - 001 State Space Control
ME EN 5210 - 001 State Space Control
- Class Number: 5394
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 13
ME EN 5230 - 001 Intro to Robot Control
ME EN 5230 - 001 Intro to Robot Control
- Class Number: 12678
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 18
ME EN 5400 - 001 Vibrations
ME EN 5400 - 001 Vibrations
- Class Number: 16193
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 5520 - 001 Composite Mat'ls
ME EN 5520 - 001 Composite Mat'ls
- Class Number: 2735
- Instructor: ADAMS, DANIEL
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 31
ME EN 5530 - 001 Continuum Mechanics
ME EN 5530 - 001 Continuum Mechanics
- Class Number: 16195
- Instructor: BRANNON, REBECCA M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5540 - 001 Mechanics Biol Tissues
ME EN 5540 - 001 Mechanics Biol Tissues
- Class Number: 17499
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: No
- Seats Available: 12
ME EN 5730 - 001 Microfluid Chip Design
ME EN 5730 - 001 Microfluid Chip Design
- Class Number: 17507
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: No
- Fees: $100.00
- Seats Available: 5
ME EN 5810 - 001 Thermal Sys Des
ME EN 5810 - 001 Thermal Sys Des
- Class Number: 16197
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: -1
ME EN 5830 - 001 Aero Propulsion
ME EN 5830 - 001 Aero Propulsion
- Class Number: 16199
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 5910 - 001 Co-Op
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).
ME EN 5910 - 001 Co-Op
- Class Number: 16179
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).
ME EN 5920 - 001 Design Project
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5920 - 001 Design Project
- Class Number: 3516
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
- Class Number: 1569
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
- Class Number: 3403
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5960 - 001 Scanning Electron Microscopy
ME EN 5960 - 001 Scanning Electron Microscopy
- Class Number: 17510
- Instructor: DELONG, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 3.0 - 4.0
- Requisites: Yes
- Wait List: No
- Fees: $149.00
- Seats Available: 1
ME EN 5960 - 004 Advanced Manufacturing
Please contact the instructor to be placed on the registration list.
ME EN 5960 - 004 Advanced Manufacturing
- Class Number: 8221
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
- Class Number: 10933
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 5
Please contact the instructor to be placed on the registration list.
ME EN 5960 - 008 Micro Actuators
Students taking this class must enroll in one of these lab sections as well: ME EN 5960-009, ME EN 5960-010, ME EN 5960-011 or ME EN 5960-012.
ME EN 5960 - 008 Micro Actuators
- Class Number: 16204
- Instructor: KIM, HANSEUP
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
Students taking this class must enroll in one of these lab sections as well: ME EN 5960-009, ME EN 5960-010, ME EN 5960-011 or ME EN 5960-012.
ME EN 5960 - 009 Micro Actuators Lab
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 009 Micro Actuators Lab
- Class Number: 16212
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 010 Micro Actuators Lab
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 010 Micro Actuators Lab
- Class Number: 16213
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 011 Micro Actuators Lab
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 011 Micro Actuators Lab
- Class Number: 16214
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 012 Micro Actuators Lab
Students registering for this class must also register for ME EN 5960-008.
ME EN 5960 - 012 Micro Actuators Lab
- Class Number: 16215
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 5960-008.
ME EN 6010 - 001 Manufacturing Process
ME EN 6010 - 001 Manufacturing Process
- Class Number: 17520
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 6030 - 001 Reliability Engr
ME EN 6030 - 001 Reliability Engr
- Class Number: 16192
- Instructor: BLINN, MICHAEL P
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 6050 - 001 Micromachining
Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 6050 - 001 Micromachining
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Instructor: VALLURI, PRITHVI SAI
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 7
Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 6050 - 002 Micromachining
ME EN 6050 - 002 Micromachining
- Class Number: 16324
- Instructor: CHAPPANDA NANAIAH, KARUMBAIAH
- Instructor: RAHMAN, MAHBUBUR
- Instructor: SOLZBACHER, FLORIAN
- Instructor: VALLURI, PRITHVI SAI
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 7
ME EN 6140 - 001 Occupat Health & Safety
This class meets in the Rocky Mountain Center for Occupational and Environmental Health.
ME EN 6140 - 001 Occupat Health & Safety
- Class Number: 13098
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: -1
This class meets in the Rocky Mountain Center for Occupational and Environmental Health.
ME EN 6210 - 001 State Space Control
ME EN 6210 - 001 State Space Control
- Class Number: 5395
- Instructor: ABBOTT, JAKE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 3
ME EN 6230 - 001 Intro to Robot Control
ME EN 6230 - 001 Intro to Robot Control
- Class Number: 12679
- Instructor: MASCARO, STEPHEN A
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 5
ME EN 6400 - 001 Vibrations
ME EN 6400 - 001 Vibrations
- Class Number: 16194
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 11
ME EN 6520 - 001 Composite Mat'ls
ME EN 6520 - 001 Composite Mat'ls
- Class Number: 2736
- Instructor: ADAMS, DANIEL
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 18
ME EN 6530 - 001 Continuum Mechanics
ME EN 6530 - 001 Continuum Mechanics
- Class Number: 16196
- Instructor: BRANNON, REBECCA M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
ME EN 6540 - 001 Mechanics Biol Tissues
ME EN 6540 - 001 Mechanics Biol Tissues
- Class Number: 17502
- Instructor: MONSON, Ken
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: No
- Seats Available: 15
ME EN 6730 - 001 Microfluid Chip Design
ME EN 6730 - 001 Microfluid Chip Design
- Class Number: 17509
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Wait List: No
- Fees: $100.00
- Seats Available: -1
ME EN 6810 - 001 Thermal Sys Des
ME EN 6810 - 001 Thermal Sys Des
- Class Number: 16198
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
ME EN 6830 - 001 Aero Propulsion
ME EN 6830 - 001 Aero Propulsion
- Class Number: 16200
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 9
ME EN 6950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 1570
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 1571
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6960 - 001 Scanning Electron Microscopy
ME EN 6960 - 001 Scanning Electron Microscopy
- Class Number: 17511
- Instructor: DELONG, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 3.0 - 4.0
- Requisites: Yes
- Wait List: No
- Fees: $149.00
- Seats Available: 5
ME EN 6960 - 002 Systems Eng. II
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 002 Systems Eng. II
- Class Number: 10930
- Instructor: GOLDBERG, BENJAMIN E
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 004 Advanced Manufacturing
ME EN 6960 - 004 Advanced Manufacturing
- Class Number: 11534
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 3
ME EN 6960 - 005 Advanced Manufacturing
ME EN 6960 - 005 Advanced Manufacturing
- Class Number: 11535
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 5
ME EN 6960 - 006 Heterogeneous Microsystems Tec
Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.
ME EN 6960 - 006 Heterogeneous Microsystems Tec
- Class Number: 8262
- Instructor: BAKER, BRIAN
- Component: Lecture
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Fees: $60.00
- Seats Available: 11
Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.
ME EN 6960 - 008 Micro Acuators
Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.
ME EN 6960 - 008 Micro Acuators
- Class Number: 11662
- Instructor: KIM, HANSEUP
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.
ME EN 6960 - 009 Micro Acuators
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 009 Micro Acuators
- Class Number: 11664
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 4
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 010 Micro Acuators
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 010 Micro Acuators
- Class Number: 5406
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 011 Micro Acuators
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 011 Micro Acuators
- Class Number: 13714
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 012 Micro Acuators
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 012 Micro Acuators
- Class Number: 13715
- Instructor: BULBUL, A N M ASHRAFUZZAMAN
- Instructor: KIM, HANSEUP
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 2
Students registering for this class must also register for ME EN 6960-008.
ME EN 6960 - 014 Manufacturing Practices
ME EN 6960 - 014 Manufacturing Practices
- Class Number: 16218
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 6960 - 015 Manufacturing Practices
ME EN 6960 - 015 Manufacturing Practices
- Class Number: 14891
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 3
ME EN 6960 - 016 Manufacturing Practices
ME EN 6960 - 016 Manufacturing Practices
- Class Number: 14893
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 2
ME EN 6960 - 017 Manufacturing Practices
ME EN 6960 - 017 Manufacturing Practices
- Class Number: 16219
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 1572
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1573
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7110 - 001 System Safety
ME EN 7110 - 001 System Safety
- Class Number: 16208
- Instructor: BLOSWICK, DONALD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 9
ME EN 7120 - 001 Functional Anatomy
To be added to the waitlist, please send an email to roannakeough@me.com with your name, unid, department, degree program (BS, MS, PhD) and an email address for us to contact you.
ME EN 7120 - 001 Functional Anatomy
- Class Number: 16206
- Instructor: DROGE, JOHN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $250.00
- Seats Available: 0
To be added to the waitlist, please send an email to roannakeough@me.com with your name, unid, department, degree program (BS, MS, PhD) and an email address for us to contact you.
ME EN 7210 - 001 Optimal Controls
ME EN 7210 - 001 Optimal Controls
- Class Number: 16205
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $20.00
- Seats Available: 2
ME EN 7530 - 001 Fracture
ME EN 7530 - 001 Fracture
- Class Number: 16209
- Instructor: THOMSEN, MARK
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 11
ME EN 7660 - 001 Adv Convection
ME EN 7660 - 001 Adv Convection
- Class Number: 16210
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 7710 - 001 Env Fluid Dynamics
ME EN 7710 - 001 Env Fluid Dynamics
- Class Number: 16211
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
This is a seminar class.
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
- Class Number: 7852
- Instructor: PARDYJAK, ERIC
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
This is a seminar class.
ME EN 7960 - 003 Robotics Seminar
ME EN 7960 - 003 Robotics Seminar
- Class Number: 10747
- Instructor: HOLLERBACH, JOHN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 12
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 1574
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 1575
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
- Class Number: 1576
- Instructor: AMEEL, TIM
- Component: Continuing Registration
- Type: In Person
- Units: 0.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.